Lockwood 9000 Panic Bar

More documents

Recommendations

Info

9000 Series Panic Exit DevicePanic Exit Device SpecificationsLockwood’s 9000 Series Panic Devices aredesigned to provide a ready means ofescape at all times and still maintain highlevels of security.Designed to comply with world classstandards for both safety and fire.Safety & SecurityThe main purpose of a panic exit device isto give safe and effective escape through adoorway with minimum effort and withoutprior knowledge of the device.In a panic situation, a group of people willreact differently from an individual. Whentwo or more people are running to anescape door, probably in darkness and/orsmoke, it is possible that the first one toreach the door will not necessarily operatethe panic device, but can push the surfaceof the door while other people will be tryingto operate the panic bar by hand or bodypressure.The Lockwood 9000 Series Panic ExitDevices will enable a door to be opened atall times by hand or body pressure alongthe inside face of the panic device and notrequire the use of a key or any other object.All Lockwood 9000 Series Panic ExitDevices are designed for ease of openingby the young, elderly and handicapped.StandardThe Lockwood 9000 Series Panic ExitDevices meet or surpass the followingAustralian and worldwide standards.EN1125:1997These products have been successfullytested on fire door assemblies inaccordance with Australian StandardAS 1905.1: 1997 Fire Resistant Doorsets.This product has been successfully testedin accordance with AS 2331.3.1: 1980Neutral Salt Spray Test (NSS TEST).This product has been successfully testedin accordance with Level D3 (Durability)Australian Lock Standard(AS 4145.2: 1993).This product has been successfully testedin accordance with Level S2 (PhysicalSecurity) Australian Lock Standard(AS 4145.2: 1993).PerformanceMeets European Standard EN1125:1997Normal SituationsLow opening pressure is ideal for children, older people and the handicapped.Under these conditions a light push of 8 kg (maximum) will operate the push bar.Panic SituationsDevice operates in panic situations even if door is subject to loads of 100 kg.Under these conditions a maximum of 22 kg will operate the push bar.4Lockwood Security Products
9000 Series Panic Exit DevicePanic Exit Device Specifications (continued)DescriptionLockwood 9000 Series Panic Exit Devicesare available in a range of functions.Mechanism design ensures easyinstallation, clean styling and ease ofoperation. Suitable for single or doubledoors.ApplicationsIt is important that the width of the passageof the door is not unduly reduced by theprojection of the operating bar. This is whythe standards set the projection at 100 mm(EN1125:1997). Lockwood has reduced thisprojection to 60 mm with its push bar9000 Series, allowing for a panic bar in anarrow passage without modification of thedoor or the number of units of passage.Suitable for single or double doors, timber,metal, narrow profile, glass security and firedoors.Features & SpecificationsDeadlatching on all bolts.Safety clutch outside lever trim plateprotects the unit from damage that couldrender the device inoperable.Adjustable on site.Automatic top and bottom latchesmaintaining the bolt drawn in when the dooris open (vertical version).Surface mounted for ease of installation.Pick resistant bottom latch.HandingAll functions are reversible and non handedexcept 9500/9600 Series mortice lockversions.MaterialsThe body is manufactured of steel.Internal mechanisms made of steelor brass.Main cover made of decoratedelectroplated steel pressing.Secondary cover made of decoratedZamak.Horizontal bar made of decorated steel.Lever plate operating mechanism is madefrom electroplated steel pressings with highdensity zinc alloy cover.LatchboltMade of double chrome plated steel.Auxiliary BoltMade of double chrome plated steel.Door ThicknessStandard 35 to 45 mm doors.Mortice lock version 32 to 48 mm doors.Specify door thickness when other thanstandard.Product WidthStandard maximum 838 mm to suit(900 mm) door.1141 to suit (1200 mm) door.Door HeightStandard maximum height 2300 mm(vertical rod version).For doors between 2300 to 3000 mmin height, order extension rod kitPart No. 9000/50SIL.Installed with centre line of exit device at1023 mm above finished floor level.DoorstileSuitable for both 90° and flush head doorstiles minimum head clearance requirementof 30 mm.Outside TrimsKey entry, key entry with pull plate andkey/lever entry with mechanism safetyoverride (refer details page 10).Hold-back (dogging).Euro cylinder key hold-back available onall types.Hold-back is not an approved function onfire doors.Standard FinishesBody – Sliver, Powdercoat.Touchbar – Black, Powdercoat.KeyingAll Lockwood 9000 Series Panic ExitDevices can be used in conjunction withLockwood Master Keying Systems,standard C4 Keyed Alike or Keyed to Differ.Because of the complexity of keyingrequirements cylinders will need to beordered separately.Special KeyingCan be keyed alike, master keyed,grand master keyed, maison keyed orconstruction keyed in Lockwood securitykeying systems.Specification ServiceFor hardware specification assistance, referto your local Lockwood Sales Office orAuthorised Agent.A comprehensive obligation free doorhardware specification can be prepared byour hardware representatives.Typical Door InstallationsSingle Door withRim Device9000EOSIL9100EOSILSingle Door withVertical Device9300EOSIL9400EOSILPair of non-rebated Doorswith 2 Vertical Devices9300EOSIL9400EOSIL9300EOSIL9400EOSILPair of Rebated Doors1 Vertical Device and1 Rim device9300EOSIL9400EOSIL9000EOSIL9100EOSILPair of Rebated Doors1 Vertical Device, MorticeLock and Rebate Strike9300EOSIL9400EOSIL9500MLSIL9600MLSILLockwood Security Products5
Page 2 and 3: 9000 Series Panic Exit DeviceLockwo
Page 6 and 7: 9000 Series Panic Exit Device9000/9
Page 8 and 9: 9000 Series Panic Exit Device9500/9
Page 10 and 11: 9000 Series Panic Exit DeviceLatchi
Page 12: Visit us at: www.lockwoodsecurity.c

Lockwood 9000 Panic Bar

Create successful ePaper yourself

Delete template?

Save as template?