High Quality Jeantil Slurry Tankers Product Information ... - Fatcow

More documents

Recommendations

Info

Precision spreading and work ratein all productsHanging spreading ramps:RP12-40, RP12-48, RP16-48, RP18-48Work rate- Emptying rate up to 8m3 /min- Feed Ø150 or 200- Emptying accelerator on top outletØ150- 40 or 48 outlets Ø40- 1 or 2 grinder distributorsQuality of work- Quality transversal distribution from10 m3/hectare- Reduced smells- DPA with inductive flowmeter- Grinder distributor with 2 verticalcutting axes (Exacut)- Work possible on all types of crops- Hydraulic anti-drip system- Each hose guided to the soil by 2spring rods- Constant space between hoses- Setting the spreading pressureQuality construction- 120 x 60 section ramp arm- Hydraulic slope corrector- Doubled ramp frame- Sequential control arm opening andanti-drip- Set of stands for winter storageReliability and long life- Unit entirely galvanised- Anti-drip rotation on ertalon ring- Hoses protected in the ramp chassisSafety- Retractable ramp end- Mechanical transport locking withhydraulic control- Stone trap on outlet and on grinderRP 16 48Anti-drip jackSetting spreading pressureRP 12 40Traffic signsRP12 40RP12 48Security for endsRamp lockingRP16 48RP18 48Working width (m) 12 12 12 15Number of outlets Ø40 4 6 8 5Maximum dose at 6km/h (Ø150) 30 38 28 25Exacut grinder and flow spreader Option 2 Exacut 30s Slope corrector Feed Ø150 Feed Ø200 Standard Option26
Optimised mechanisation costsand reduced fertiliser inputInjector with square tines orvibroflex:EDC33-11, EDC33-13, EDV 39-13, EDV45-15, EDV51-17, EDV57-19Work rate- Emptying rate up to 5m3 /min- Feed Ø150- Up to 5.7 m of working width- Power of 8-10CV needed per metreQuality of work- Quality transversal distribution at10m3/ha- Better distribution with 3 cm interrow- Automatic control of the dose spread- Elimination of smells and nitrogenlosses- Distributor and micrometric dosagevalve as standard- Double effect lifting with nitrogenballs to follow the terrain- Depth control by gauge wheels orrollers- Depth gauge at front of tank- Dosimat Ø60 grinder distributor- Exacut Ø60 grinder distributorQuality construction- Tube chassis 100 x 100 x 8- Galvanised chassis- hydraulic folding- Slurry injector bit integral to the tine- Tines spread over 2 rows- Large clearance under chassis- Inter-row of 80 cm front and rearReliability and long life- Square tines 25 mm for deep work- Vibroflex tines for surface workSafety- Transport traffic signs- System for automatic reversal ofrotation if there is a blockageEDV 51-17Injector with vibroflex tines + rollerMicrometric dosage valveEDV tine workSquare tine 35EDC 33-11 EDC 33-13 EDV 39-13 EDV 45-15 EDV 51-17 EDV 57-19 EDV 65-13Working width (m) 3,3 3,3 3,9 4,5 5,1 5,7 6,5Number of tines 11 13 13 15 17 19 13Inter row (m) 0,3 0,25 0,3 0,3 0,3 0,3 0,5Square tines 35 Vibroflex tines Metallic gauge wheels 2 2 2 2 4 4 -Bar roller Ø500 Flow spreader with micrometric dosagevalve Dosimat grinder and flow spreader (1) (1) (1) (1)Exacut grinder and flow spreader (1) (1) (1) (1) Standard Option (1) Fitting advised for good distribution27
Page 1 and 2: Slurry tanker2010-2011
Page 3 and 4: Expertise and design 100% JEANTILSt
Page 5 and 6: Performance and maximum comfort in
Page 7 and 8: Performance and multiple use adapte
Page 9 and 10: Performance and multiple use adapte
Page 11 and 12: The multi-purpose, economical and e
Page 13 and 14: The benchmark for performanceand mu
Page 15 and 16: Performances and multiple useHydrau
Page 17 and 18: Simplicity and work rate at the ser
Page 19 and 20: Performance and multiple useto opti
Page 21: One single arm to adapt to all situ
Page 24 and 25: Work rate and precision in inputsin
Page 28 and 29: Injector with oblique disksØ630 mi
Page 30 and 31: DPAE with inductive flowmeter Ø150
Page 32 and 33: AccessoriesLoading cone- Valve Ø20
Page 34 and 35: AccessoriesWorking headlight suppor
Page 36: Gti4500Gti5500Approval DREAL 25 km/

High Quality Jeantil Slurry Tankers Product Information ... - Fatcow

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?