High Quality Jeantil Slurry Tankers Product Information ... - Fatcow

Optimised mechanisation costsand reduced fertiliser inputInjector with square tines orvibroflex:EDC33-11, EDC33-13, EDV 39-13, EDV45-15, EDV51-17, EDV57-19Work rate- Emptying rate up to 5m3 /min- Feed Ø150- Up to 5.7 m of working width- Power of 8-10CV needed per metreQuality of work- Quality transversal distribution at10m3/ha- Better distribution with 3 cm interrow- Automatic control of the dose spread- Elimination of smells and nitrogenlosses- Distributor and micrometric dosagevalve as standard- Double effect lifting with nitrogenballs to follow the terrain- Depth control by gauge wheels orrollers- Depth gauge at front of tank- Dosimat Ø60 grinder distributor- Exacut Ø60 grinder distributorQuality construction- Tube chassis 100 x 100 x 8- Galvanised chassis- hydraulic folding- Slurry injector bit integral to the tine- Tines spread over 2 rows- Large clearance under chassis- Inter-row of 80 cm front and rearReliability and long life- Square tines 25 mm for deep work- Vibroflex tines for surface workSafety- Transport traffic signs- System for automatic reversal ofrotation if there is a blockageEDV 51-17Injector with vibroflex tines + rollerMicrometric dosage valveEDV tine workSquare tine 35EDC 33-11 EDC 33-13 EDV 39-13 EDV 45-15 EDV 51-17 EDV 57-19 EDV 65-13Working width (m) 3,3 3,3 3,9 4,5 5,1 5,7 6,5Number of tines 11 13 13 15 17 19 13Inter row (m) 0,3 0,25 0,3 0,3 0,3 0,3 0,5Square tines 35 Vibroflex tines Metallic gauge wheels 2 2 2 2 4 4 -Bar roller Ø500 Flow spreader with micrometric dosagevalve Dosimat grinder and flow spreader (1) (1) (1) (1)Exacut grinder and flow spreader (1) (1) (1) (1) Standard Option (1) Fitting advised for good distribution27