Long Reach Box Cam - Danly IEM

More documents

Recommendations

Info

Retainer Mounting MethodsSTANDARD RETAINER STANDARD RETAINER STANDARD RETAINERThe soft mounting face ofthe cam slide allows for themounting of a standard lightor heavy duty punch retainer.Oversized retainers work wellif multiple punches are set inan even load pattern in relationto the center of the slide.Off-center loads will reduce theworking tonnage rating of the cam.Multiple retainers easily fit our“double wide” #4L and #14Lcams. Applications requiringoff-center loading of the slidereduces the working tonnagerating of the cam.GANG MOUNTING RETAINERS ON (2) CAMSUsing a bridge block fastened on the slide faceof two of the same cams allows for mounting ofmultiple retainers. Precise timing of both camslides ensures load sharing between the cams.iv
Gib Cam TMTechnical InformationProduct FeaturesThe Gib Cam is designed to fit into tight spotsto replace the one-of-a-kind made-in-house cams.The low profile slide and gib design glides alonga graphite plugged base plate for continuouslubrication. To ensure the tooling is removedfrom the work piece on every stroke of the press,the slide is powered by a 45° positive returndriver. The Gib Cam’s off-the-shelf approachand compact design will make this a camdesigned into dies for years to come.GL-5 Gib Cam TMMETRICDESIGNLOWPROFILEPOSITIVERETURNWorking Spring Maximum UnitFace Size Travel Load Rating Force Tool Wt. WeightModel mm/in mm/in kN/tons N/lbs kg/lbs kg/lbsGS-3GM-4GL-5GL-6.535 x 30 24.0 8.9 71.0 1.3 21.38 x 1.18 .94 1 16.0 3.0 5.050 x 40 32 17.8 80.0 1.8 61.97 x 1.57 1.26 2 18.0 4.0 13.060 x 50 40.0 26.7 93.0 2.3 92.36 x 1.97 1.57 3 21.0 5.0 2098 x 50 40.0 53.4 93.2 4.55 133.86 x 1.96 1.57 6 21.0 10 28.6NOTES:♦ Gib Cams TM are hard metric. English conversions are for reference only.♦ The cam slide has .0005" – .001" (0.0127 – .0254mm) clearance betweeneach side of the slide and body to allow for lubrication and heat dissipation.Tighter tolerances are available upon request.Calculated stroke, tonnage and wear curves are presentedas a guideline for design and maintenance only.No warranty exists, either expressed or implied, as a result ofthe application, as it may relate to the information provided.Ask Customer Service for design templates on our website or CD.1
Page 1 and 2: IEMIEMwww.danly.comTRUSTED SOLUTION
Page 3 and 4: ContentsPAGE NUMBERCam Selection Ma
Page 5: Cam Selection MatrixShort Length -
Page 9 and 10: Gib Cam TMGM-4All dimensions are fo
Page 11 and 12: Gib Cam TMGL-6.5All dimensions are
Page 13 and 14: Mini Cam TM101/101MM Slide UnitCam
Page 15 and 16: Standard Box Cam2L External Spring
Page 17 and 18: External Spring Box Cam3L/3LHMCam m
Page 19 and 20: External Spring Box Cam5L/5LHMCam m
Page 21 and 22: Internal Spring Box Cam23L/23LMMCam
Page 23 and 24: Maximum Power Cam TM (MP)24MPAll di
Page 25 and 26: Long Reach Box Cam11L Long Reach Bo
Page 27 and 28: Long Reach Box Cam12L/12LMMCam mode
Page 29 and 30: Long Reach Box Cam (Double Wide)14L
Page 31 and 32: CUSTOM CAMSIEMwww.danly.comProduct

Long Reach Box Cam - Danly IEM

Create successful ePaper yourself

Delete template?

Save as template?