Long Reach Box Cam - Danly IEM

Gib Cam TMTechnical InformationProduct FeaturesThe Gib Cam is designed to fit into tight spotsto replace the one-of-a-kind made-in-house cams.The low profile slide and gib design glides alonga graphite plugged base plate for continuouslubrication. To ensure the tooling is removedfrom the work piece on every stroke of the press,the slide is powered by a 45° positive returndriver. The Gib Cam’s off-the-shelf approachand compact design will make this a camdesigned into dies for years to come.GL-5 Gib Cam TMMETRICDESIGNLOWPROFILEPOSITIVERETURNWorking Spring Maximum UnitFace Size Travel Load Rating Force Tool Wt. WeightModel mm/in mm/in kN/tons N/lbs kg/lbs kg/lbsGS-3GM-4GL-5GL-6.535 x 30 24.0 8.9 71.0 1.3 21.38 x 1.18 .94 1 16.0 3.0 5.050 x 40 32 17.8 80.0 1.8 61.97 x 1.57 1.26 2 18.0 4.0 13.060 x 50 40.0 26.7 93.0 2.3 92.36 x 1.97 1.57 3 21.0 5.0 2098 x 50 40.0 53.4 93.2 4.55 133.86 x 1.96 1.57 6 21.0 10 28.6NOTES:♦ Gib Cams TM are hard metric. English conversions are for reference only.♦ The cam slide has .0005" – .001" (0.0127 – .0254mm) clearance betweeneach side of the slide and body to allow for lubrication and heat dissipation.Tighter tolerances are available upon request.Calculated stroke, tonnage and wear curves are presentedas a guideline for design and maintenance only.No warranty exists, either expressed or implied, as a result ofthe application, as it may relate to the information provided.Ask Customer Service for design templates on our website or CD.1