Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
should bisect the 90 degree angle made by the joint and a drag angle of from10 to 15 degrees is used.3. Strike an arc and move the torch progressively along the joint at a smoothsteady rate. A travel rate of 25 to 35 ipm should be used.4. The arc should sound smooth and steady. If spatter occurs and the arcpops reduce the wire feed speed until the arc smooths out.The above condition provides 16.5 volts and 89 amps. If exact volts and amps arerequired, purchase meter kit P/N 005-0585.CobraMig 260 Owner's Manual - Page 15