walsall Explosion Protected Electrical Equipment

EEx e and EEx i Terminal Boxes - Stainless and Mild SteelType SL4 - 150mm x 150mm x 90mmEEx e and EEx i Terminal Boxes - Stainless and Mild SteelType SL5 - 190mm x 150mm x 90mmEEx e II and EE x ia IIC Zones 0,1,2,21,22 T3,T4,T5,T6 Group II Cat 1,2 ATEX/GOST/ULEEx e II and EE x ia IIC Zones 0,1,2,21,22 T3,T4,T5,T6 Group II Cat 1,2 ATEX/GOST/ULHAZARDOUS AREA SPECIFICATIONHAZARDOUS AREA SPECIFICATIONMarking to 94/9/ECType of protectionTemperature classArea classificationCertification NosIngress protectionPower dissipationII 2 GD, II 1 GD T6,T5,T4,T3EEx e II and EEx ia IICT6(-50˚C to +40˚C), T5 (+55˚C), T4(+85˚C), T3(+120˚C)Zones 0,1,2,21,22. Groups IIA, IIB, IICSira 99ATEX3199 and Sira 00ATEX3027UGOST ‘R’ POCC GB. гБ05.BO1131IP66/67 to EN60529:1992Maximum 11 Watts. Except for dust applicationswhere the maximum is 5.5 WattsMarking to 94/9/ECType of protectionTemperature classArea classificationCertification NosIngress protectionPower dissipationII 2 GD, II 1 GD T6,T5,T4,T3EEx e II and EEx ia IICT6(-50˚C to +40˚C), T5 (+55˚C), T4(+85˚C), T3(+120˚C)Zones 0,1,2,21,22. Groups IIA, IIB, IICSira 99ATEX3199 and Sira 00ATEX3027UGOST ‘R’ POCC GB. гБ05.BO1131IP66/67 to EN60529:1992Maximum 11 Watts. Except for dust applicationswhere the maximum is 5.5 WattsENCLOSURE SPECIFICATIONENCLOSURE SPECIFICATIONDimensionsMaterial boxFinishWeight emptyCover fixingGasketEarthingEntriesExternal MountingInternal Mounting150mm x 150mm x 90mm1.5mm 316L, (1.4404) stainless steel or mild steelStainless steel – electropolishedMild steel – Powder coated RAL 70321.9KgCaptive M6 stainless steel hexagon head slotted screwsOne piece fire resistant closed cell neoprene for Ta -40˚COne piece silicon rubber for Ta -50˚C6mm brass internal/external earth stud as standardOptional brass earth stud welded to coverDirect through bodyExternal lugs with 8mm clearance holesDIN rail or mounting plate to suitDimensionsMaterial boxFinishWeight emptyCover fixingGasketEarthingEntriesExternal MountingInternal Mounting190mm x 150mm x 90mm1.5mm 316L, (1.4404) stainless steel or mild steelStainless steel – electropolishedMild steel – Powder coated RAL 70322KgCaptive M6 stainless steel hexagon head slotted screwsOne piece fire resistant closed cell neoprene for Ta -40˚COne piece silicon rubber for Ta -50˚C6mm brass internal/external earth stud as standardOptional brass earth stud welded to coverDirect through bodyExternal lugs with 8mm clearance holesDIN rail or mounting plate to suitAll Dimensions in mmAll Dimensions in mmA GUIDE TO PHYSICAL TERMINAL CAPACITYA GUIDE TO ENTRY CAPACITYA GUIDE TO PHYSICAL TERMINAL CAPACITYA GUIDE TO ENTRY CAPACITYVerticle RailHorizontal RailWDU 2.51x221x22WDU 4WDU 6 WDU 101x18 1x13 1x101x18 1x13 1x10Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the maximum power dissapation given above is not exceededGland Size mmSide A + BSide C + D208825553233WDU 2.5 WDU 4WDU 6 WDU 10Verticle Rail1x301x24 1x18 1x14Horizontal Rail1x221x18 1x13 1x10Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the maximum power dissapation given above is not exceededGland Size mmSide A + BSide C + D2081025573233ORDERING INFORMATIONORDERING INFORMATIONMaterial EEx e Terminal Box EEx e U Component Approved Enclosure EEx ia Terminal BoxStainless Steel SLS41 SLS42 SLS43Mild Steel SLM41 SLM42 SLM43Optional Extras6mm earthing stud welded to coverEquipment mounting plate, mild steel powder coated10mm internal/external stainless steel earth studCES6SL4MPSSETMaterial EEx e Terminal Box EEx e U Component Approved Enclosure EEx ia Terminal BoxStainless Steel SLS51 SLS52 SLS53Mild Steel SLM51 SLM52 SLM53Optional Extras6mm earthing stud welded to coverEquipment mounting plate, mild steel powder coated10mm internal/external stainless steel earth studCES6SL5MPSSET13 tel: +44 (0)121 500 6161 fax: +44 (0)121 500 6300 sales@walsall-ltd.com www.walsall-ltd.comtel: +44 (0)121 500 6161 fax: +44 (0)121 500 6300 sales@walsall-ltd.com www.walsall-ltd.com 14