Exhibits J, Grade Crossings Standards Manual - Metrolink

10’ LONG 2 LB. PER LINEAL FOOT GALVANIZED SQUARE STEEL POST( " DIA. MOUNTING HOLES)2’-0"2’-6" 3"3’-3"2’-0"2’-3" 3" 1’-6" 3"1 "2 "1’-0" 1’-0"PRIVATERRCROSSINGNO TRESPASSINGRIGHT TO PASS BY PERMISSIONSUBJECT TO CONTROL OF OWNERSECTION 1008, CIVIL CODE9"4TRACKSCPUC STANDARD NO. 1-CTHIS SIGN COMPLIES WITH THE REQUIREMENTS OFCALIFORNIA PUBLIC UTILITIES GENERAL ORDER NO. 75-C9"4 - " DIA. HOLESFOR " DIA. BOLTSWHITE REFLECTIVESHEETING REVERSESCREENED STOP SIGNREDREFLECTORIZED ALUMINUMPLATE, " THICKBLACK BORDER AND CROSSPER MATERIAL SPECIFICATIONSMULTIPLE TRACK WARNINGSEE DETAIL BELOW2" SQUARE STEEL POSTFOR POST DETAILS SEEDRAWING ES6101GROUND LINE2" SQUARE STEEL ANCHOR(30" LONG)REFLECTORIZED ALUMINUMPANEL, " THICKBLACK BORDER AND CROSSPER MATERIAL SPECIFICATIONS1" RAD2" SQUAR STEEL POSTFOR POST DETAILS SEEDRAWING ES61012" SQUAR STEEL ANCHORFOR ANCHOR DETAILS SEEDRAWING ES6101RAILROADRREFLECTORIZED ALUMINUM9" 9"SEE MATERIAL SPECIFICATIONSFOR TEXT STYLEPANEL, " THICK1" 7" 1"1" 7" 1"1’-6"9" 9"4RCROSSINGPEDESTRIANSAND BICYCLESONLYTRACKS4TRACKS1’-1"9"4" 4"2’-3"NO. R15-20 "2’-3"2’-6"CPUC STANDARD NO. 1-D1’-1"SCALE: 3" = 1’-0"1 "2 "GROUND LINE4 - " DIA. HOLESFOR " DIA. BOLTSNOTE:" DIA. HOLES FOR " DIA.GALVANIZED BOLTS5’-6"NOTES:REFLECTORIZED ALUMINUMPANEL, " THICKSIGN R15-2 ONLY USED IFTWO OR MORE TRACKS,NUMBER TO CORRESPONDTO NUMBER OF TRACKSAT CROSSING.0 "1"8’ LONG 2 LB. PER LINEAL FOOT PAINTED SQUARE STEEL POST( " DIA. MOUNTING HOLES)CPUC STANDARD NO. 1-CPRIVATE CROSSING SIGN:TWO SIGNS SHALL BE USED AT EACH PRIVATE GRADECROSSING NOT EQUIPPED WITH AUTOMATIC WARNINGDEVICES, ONE FACING EACH ROAD APPROACH UNLESSCPUC STANDARD NO. 1-DPEDESTRIAN AND BICYCLECROSSING SIGN:FOR USE AT LOCATIONS DESIGNATED BYORDER OF THE CALIFORNIA PUBLICUTILITIES COMMISSION. THE WORDING"AND BICYCLES" IS OPTIONAL AND MAYBE OMITTED WHERE APPROPRIATE.NOREQ’D.THERE IS NO SPACE TO LOCATE THE SIGN OR SIGNS.1114441122211444MATERIAL SPECIFICATIONS:SIGNS:CPUC STANDARD NO. R15-2MULTIPLE TRACK WARNING:BILL OF MATERIALITEMNo. 1-C - PRIVATE CROSSING SIGN - COMPLETENo. 1-C "Stop" Panel.No. 1-C "Private crossing" Panel.2.79 LB. PER LINEAL FOOT SQUARE STEEL POST, 10 FT. LONG,WITH " DIA. KNOCKOUT HOLES, 4"x8"x " TRIANGULARANCHOR PLATE AND POINTED END, ALL GALVANIZED INACCORDANCE WITH A.S.T.M. SPEC. A-386" DIA, -20 x 2" ALUMINUM CARRIAGE BOLTS,ALLOY 2024-T4."-20 TAMPER RESISTANT NUTS, ALCOA PIECE NO.V-30-1365." x ¤" x 0.064" PLAIN, FLAT ALUMINUM WASHERS FOR" DIA. BOLTS, ALLOY 2024-T4No. 1-D - PEDESTRIAN AND BICYCLE CROSSING SIGN-COMPLETENo. 1-D SIGN PANEL.2.79 LB. PER LINEAL FOOT FLANGED CHANNEL STEEL POST, POINTED8’-0" LONG, POINTED END, WITH " DIAMETER KNOCKOUT HOLES" DIAMETER BY 2" GALVANIZED MACHINE BOLTS.GALVANIZED HEXAGON NUTS, " DIAMETER TAP.GALVANIZED CUT WASHERS FOR " DIAMETER BOLTS.No. R15-2 - NUMBER OF TRACKS (WHERE REQUIRED)NUMBER SIGN PANEL " x 9" x 9" WITH " DIAMETER MOUNTING HOLES."TRACKS" SIGN PANEL " x 9" x 27" WITH " DIAMETER MOUNTING HOLES." DIAMETER BY 2" GALVANIZED MACHINE BOLTS.GALVANIZED HEXAGON NUTS, " DIAMETER TAP.GALVANIZED CUT WASHERS FOR " DIAMETER BOLTS." THICK MILL FINISH ALUMINUM PANEL, ALCOA 6016-T6 OR EQUAL.PAINT ALL SIDES WITH LINEAR POLYURETHANE. COLOR FACE OF PANEL WITHENGINEERING GRADE, PRESSURE SENSITIVE , RETRO-REFLECTIVE WHITE VINYLSHEETING. SILK SCREEN LEGEND WITH BLACK INK. FINISH WITH EXTERIORGRADE PRESSURE SENSITIVE CLEAR MYLAR, 3M-1150 OR EQUAL.STEEL POSTS:12 GAGE (.105 THICK) 2.42 LBS. PER LINEAL FOOT SQUARE STEEL TUBE(ASTM A-36) WITH " DIA. KNOCKOUT HOLES. ALL GALVANIZEDIN ACCORDANCE WITH ASTM A-386.STEEL ANCHORS:12 GAGE (.105 THICK) 2.42 LBS. PER LINEAL FOOT SQUARE STEEL TUBE(ASTM A-36) WITH " DIA. KNOCKOUT HOLES. ALL GALVANIZEDIN ACCORDANCE WITH ASTM A-386.TEXT STYLE:TEXT TO BE "ARIAL BOLD" PER S.C.R.R.A. STANDARD ES1212.HARDWARE:ALL HARDWARE TO BE VANDAL RESISTANT.BOLTS: " X 2" LONG ALUMINUM CARRIAGE BOLTS, 2024-T4 ALLOY.(FOR SIGNS)BOLTS: " X 3" LONG ALUMINUM CARRIAGE BOLTS, 2024-T4 ALLOY.(FOR ANCHORS)NUTS: TAMPER RESISTANT, ALCOA OR EQUAL.WASHERS: PLAIN, FLAT ALUMINUM WASHERS.FOR USE AT MULTIPLE TRACK CROSSINGS.PRE-FINAL SUBMITTAL21REV.10/31/0504/12/02DATEREVISIONSREVISED TITLE BLOCKREDRAW AND ADD MULTIPLE TRACK WARNING DETAILDESCRIPTIONACACDES.MEMMEMENG.DRAWN BY: A. CARLOS DATE:04/12/02APPROVED BYMANAGER: CIVIL ENGINEERINGDIRECTOR OF ENGINEERING AND CONSTRUCTIONTHE SOUTHERN CALIFORNIAREGIONAL RAIL AUTHORITYOR ITS OFFICERS OR AGENTSSHALL NOT BE RESPONSIBLEFOR THE ACCURACY ORCOMPLETENESS OF THISPLAN SHEETSOUTHERN CALIFORNIA REGIONAL RAIL AUTHORITY700 SOUTH FLOWER STREET, 26TH FLOORLOS ANGELES, CALIFORNIA 90017ENGINEERING STANDARDSPRIVATE, PEDESTRIAN AND BICYCLERAILROAD GRADE CROSSING SIGNSTANDARDSCALE:43111 1/2" = 1’-0"REVISION SHEET2CADD FILE:1 OF 1ES4311