Apollo HDRT Manual - Qvis Security

More documents

Recommendations

Info

3 Basic operationNote: The button in gray display indicates nonsupport.3.1 Turn onPlug in and turn on the power supply switch. If the Power supply indicator lightlights up then the video recorder has turned on. After startup you will hear abeep. The default setting of the video output is a multiple-window outputmode. If the startup time is within a set video recording time, the timing videorecording function will start up automatically. Then the video indicator light of thecorresponding channel will light up to let you know the DVR is working normally.Note:1). Make sure that the input voltage corresponds with the switch of the DVRpower supply.2). Power supply demands: 220V±10% /50Hz.We suggest using UPS to protect the power supply under allowable conditions.3.2 Turn offThere are two methods to turn off the DVR. Entering [main menu] and choosing[turn off] in the [turn off the system] option is called soft switch. Pressing thepower supply switch is called hard switch.Illumination:1). Auto resume after power failureIf the DVR is shut down abnormally, it can automatically backup video andresume the previous working status after a power failure.2). Replace the hard diskBefore replacing the hard disk, the power supply switch in the rear panel mustbe turned off.3). Replace the batteryBefore replacing the battery, the setting information must be saved and the powersupply switch in the rear panel must be turned off. The DVR uses a buttonbattery. The system time must be checked regularly. If the time is not correct youmust replace the battery, we recommend replacing the battery every year andusing the same battery type.Note: The setting information must be saved before replacing the batteryotherwise information will be lost.3.3 System LoginWhen the DVR boots up, the user must login and the system provides thecorresponding functions in the user preview. There are three user settings. Thenames are admin, guest and default and these names have no password. Adminis the super user preview; guest and default’s permissions are preview and videoplayback.User admin and guest’s password can be revised, while their permissions can’tbe revised; user default is the default login user whose permission can be revisedbut not its password.14
Picture 3.1 System LoginPassword protection: If the password is entered continuously wrong for threetimes, the alarm will start. If the password is continuously wrong five times, theaccount will be locked. (Through a reboot or after half an hour, the account canbe unlocked automatically).For your system security, please modify your password after first login.3.4 PreviewYou can right click mouse to choose the switch between the windows.The system date, time and channel name are shown in each viewing window.The surveillance video and the alarm status are shown in each window.1 Recording status 3 Video loss2 Motion detect 4 Camera lockTable 3.1 Preview icon3.5 Desktop shortcut menuIn preview mode you can right click your mouse to get a desktop shortcutmenu. The menu includes: main menu, record mode, playback, PTZ control,High Speed PTZ, Alarm Output, Color Setting, Output adjust, Logout, View1/4/8/9/16 screens.15
Page 3 and 4: Directory1 Welcome ................
Page 5 and 6: 1. WelcomeThank you for purchasing
Page 7 and 8: 5). Connect SATA data wire 6). Conn
Page 9 and 10: 2.4 Rear panelNote: This is the int
Page 11 and 12: 2.5.4 Audio signal outputCommonly t
Page 13: 2.6.3 Alarm output port relay param
Page 17 and 18: 3.5.2 PlaybackThere are two methods
Page 19 and 20: Button Function Button Function/ Pl
Page 21 and 22: Speed: Set the PTZ rotation range.
Page 23 and 24: 3: ScanThe PTZ can also work on the
Page 25 and 26: Picture 3.18 Color Setting3.5.7 Out
Page 27 and 28: Main menu Sub menu FunctionSystemin
Page 29 and 30: 4.2.3 PlaybackRefer to chapter 3.5.
Page 31 and 32: Picture 4.6 set the time section(In
Page 33 and 34: 4.3.4 Alarm inputWhen the system ge
Page 35 and 36: 4.4.2 Encode setupSet the video/aud
Page 37 and 38: (PPPoE setup)Picture 4.19 PPPOEInpu
Page 39 and 40: (DDNS) (dynamic domain name server)
Page 41 and 42: (Enable) Select this to make sure t
Page 43 and 44: 4.4.6 PTZ setupPicture 4.29 PTZ set
Page 45 and 46: 4.5.2 AccountManage the user purvie
Page 47 and 48: 4.5.3 Online UserLook up the networ
Page 49 and 50: X means that the hard disk is not w
Page 51 and 52: 5 FAQ and maintenance5.1 FAQIf your
Page 53 and 54: 11). The DVR can not control the PT
Page 55 and 56: 21). The storage time is not enough
Page 57 and 58: Appendix 3.Technique parametersType

Apollo HDRT Manual - Qvis Security

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?