Apollo HDRT Manual - Qvis Security

More documents

Recommendations

Info

2). Boundary Scan CallsIn Picture 3.10, click the Page Shift button to enter the PTZ control menu asshown in Picture 3.12.Please input the number of the scan in the value blank , then click the AutoScanbutton, the PTZ will begin to work on the scan line . Click the stop button to stop.5: Rotating the HorizontalClick the Horizontally Rotating button and the PTZ will begin to rotate horizontally(relative to the original position of the camera). Click the Stop button to stop.6: RotateClick on the horizontal rotating button and the PTZ will turn around.7: ResetThe PTZ will restart and clear all the data back to 0.8: Page ShiftIn Picture 3.12, click the Page-Switch button to go to Picture 3.16 (setting theauxiliary function). Set the auxiliary number corresponding to auxiliary switch onthe decoder.Picture 3.16 Auxiliary Function Control(Intuitive Auxiliary Operation) choose auxiliary equipment, select Open or Closebutton as the switch control.(Auxiliary Number) The operation of the corresponding auxiliary switch accordingto the PTZ agreement.(Page Shift) In Picture 3.16 click Page Switch button to enter Picture 3.17 PTZMain Menu, the menu itself can be control by the menu control buttons3.5.6 Color settingSet the selective image parameters (the current channel for the single windowdisplay and cursor placed for the multi-window display). You can use the desktopshortcut menu to enter the interface. The image parameters include: tonality,brightness, contrast, saturation. You can set different parameters at different timesections.24
Picture 3.18 Color Setting3.5.7 Output AdjustAdjust TV output area parameters. You can use the desktop shortcut menu orenter [main menu]> [management tools]> [Output adjust].3.5.8 LogoutPicture 3.19 Output AdjustTo logout, shut down the system or reboot the system. You can use the desktopshortcut menu or enter [main menu].Picture 3.20 Logout/Reboot the system(Logout) Quit the menu. Re-enter the password to log back in.(Shut down) Quit the system. Turn off the power supply. When you press theshut down button, there is a schedule hint. After three seconds, the system shutsdown. If you attempt to cancel midway through it will have no effect.(Reboot) Quit the system. Reboot up the system..3.5.9 Window switchPreview in a single window/four windows/eight windows/nine windows/sixteenwindows according to your choice.25
Page 3 and 4: Directory1 Welcome ................
Page 5 and 6: 1. WelcomeThank you for purchasing
Page 7 and 8: 5). Connect SATA data wire 6). Conn
Page 9 and 10: 2.4 Rear panelNote: This is the int
Page 11 and 12: 2.5.4 Audio signal outputCommonly t
Page 13 and 14: 2.6.3 Alarm output port relay param
Page 15 and 16: Picture 3.1 System LoginPassword pr
Page 17 and 18: 3.5.2 PlaybackThere are two methods
Page 19 and 20: Button Function Button Function/ Pl
Page 21 and 22: Speed: Set the PTZ rotation range.
Page 23: 3: ScanThe PTZ can also work on the
Page 27 and 28: Main menu Sub menu FunctionSystemin
Page 29 and 30: 4.2.3 PlaybackRefer to chapter 3.5.
Page 31 and 32: Picture 4.6 set the time section(In
Page 33 and 34: 4.3.4 Alarm inputWhen the system ge
Page 35 and 36: 4.4.2 Encode setupSet the video/aud
Page 37 and 38: (PPPoE setup)Picture 4.19 PPPOEInpu
Page 39 and 40: (DDNS) (dynamic domain name server)
Page 41 and 42: (Enable) Select this to make sure t
Page 43 and 44: 4.4.6 PTZ setupPicture 4.29 PTZ set
Page 45 and 46: 4.5.2 AccountManage the user purvie
Page 47 and 48: 4.5.3 Online UserLook up the networ
Page 49 and 50: X means that the hard disk is not w
Page 51 and 52: 5 FAQ and maintenance5.1 FAQIf your
Page 53 and 54: 11). The DVR can not control the PT
Page 55 and 56: 21). The storage time is not enough
Page 57 and 58: Appendix 3.Technique parametersType

Apollo HDRT Manual - Qvis Security

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?