ASSA Access Control - ASSA ABLOY

More documents

Recommendations

Info

Access Control, Door Access ControllerDAC-30 IIApplicationThe DAC-30 is used with our 4000, 6300 and ARX systems. Both systems have thesame easy two-wire communication system. DAC-30 is a connection point as well asa door controller, intended to be fitted at each door. To the DAC-30 you then connectlocks, readers, exit button, automatic door controllers etc. This provides for similar solutionsregardless of the door type and equipment. Two-Wire communication meansfewer cables, all you need is four wires to connect a DAC-30, two wires for the communicationand two wires for the power supply. No separate motor lock controllers isnecessary when connected to some models of Assa and Abloy motor locks since thisfunctionality is already included in the DAC-30. Communication between the DAC-30and the motor lock is encrypted in these cases providing for increased security.BILD!!!!!!!Technical specification• Power supply:• Max power consumption:• Temperature range:12-24 V AC / V DC80 mA+5ºC to +40ºC (Non-condensing)Accessories• DAC-30RC, Relay board with 4 programmable relays• DAC-30AI, Double-balanced alarm interface for connection to external alarm• Can be connected to: SOLICARD 4000CE and LCU9016DAC-30IICasing• Shock-resistant ABS-plastic SIS 166653• Halogen/HalogenfreeOther• Time-controlled output• Buzzer• Temporary ABP (Alarm by-pass)• Automatic door controllers• Door monitor switch• Security mode (motor lock)• Open mode (motor lock)• Locked mode (motor lock)• Electric strike• Temporary ABP that remains active if door is open to long• TamperReader technology• CL/DATA (Magnet), Wiegand, Solicell (Touch memory), ProxCE controlled and approved in level with EN50081-1 and AEN50082-2.Assa Mini Catalogue 2006 239
Access Control, Door Access ControllerSOLICARD 6390IF, 6353KS6390IFApplicationSOLICARD 6390IF and SOLICARD 6353KS are two interfaces for connectionof OEM readers such as magnet (clock/data), Wiegand (data-0/data-1) andDallas to the Solicard system.6390 I/F is a general interface that can be easily configured for a number ofdifferent reader modes.6390 I/F is equipped with inputs for a 3x4 X/Y matrix keypad, sabotage switch,and outputs for six LED:s and a buzzer.The 6353KS contains the same I/F as the 6390 I/F along with a keypad thatmakes it suitable for all applications where a OEM reader needs to be combinedwith a keypad.For instance, a dallas or proximity reader that will be used for alarm manouveringor with PIN-code.6353 KS has keys with a distinct touch response and backlit symbols, suchas a green/red man, alarm status, enter code and swipe card. The 6353KScan also be used where only common code is required, as a code lock or asan alarm bypass device.SOLICARD 6390IF, Reader interface• Magnet (Clock-data) for 6389MWL, 6383, 6320• Wiegand (Data 0-data 1) for 6385 ( Indala)• Dallas for 6370STSOLICARD 6390IF, Technical specification• Voltage:12 V DC• Power consumption:10 mA + connected load• Weight:170 g• Temperature range:-5ºC to +70ºC (Non-condensing)SOLICARD 6390IF, Casing• White ABS-plastic6353KSSOLICARD 6353KS, Reader interface• Magnet (Clock-data) for 6320• Wiegand (Data 0-data 1) for 6385 ( Indala)• Dallas for 6370STSOLICARD 6353KS, Technical specification• Voltage:12 V DC• Power consumption:70 mA + connected load• Weight:895 g• Temperature range:-30ºC to +70ºC (Non-condensing)SOLICARD 6353KS, Casing• IP54• Cast zinc alloy with white or black powder coating• Stainless steel push buttons• For special surface finish (gold or chrome), contact SolidCE controlled and approved in level with EN50081-1 and AEN50082-2.240Assa Mini Catalogue 2006
Page 5 and 6: Access Control, Code LockCompact Co
Page 7: Access Control, Door Access Control
Page 11 and 12: Access Control, Door Access Control
Page 13 and 14: Access Control, Proximity ReaderSOL
Page 15 and 16: 246Assa Mini Catalogue 2006

ASSA Access Control - ASSA ABLOY

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?