UNIPOLE & MULTIPOLE CONNECTORS

® ®Metal housing modelsTechnical CharacteristicsMechanical and ClimaticalCharacteristics Value StandardEnduranceHumidityTemperature rangeSalt spray corrosion testProtection indexClimatical category> 500 cycles IEC 60512-5 test 9aup to 95% at 60° C- 55° C + 250° C> 144 h IEC 60512-6 test 11fIP50 IEC 6052955/175/21 IEC 60068-1Note:The various tests have been carried out with FGG and EGG connector pairs,with chrome-plated brass shell and PEEK insulator.Detailed electrical characteristics, as well as materials and treatment are presentedin the chapter Technical Characteristics on page 171.FGG.2GStraight plug, key (G), cable colletFGG.2GStraight plug, key (G), cable colletand nut for fitting a bend relief 1)~22~3020.428.4ø 14S 10.5EGG.2G Fixed socket, nut fixing, key (G)ECG.2G Fixed socket with two nuts, key (G)(back panel mounting)15.6 maxi15.6 maxiS 17 2S 173.5ø 19.2M15 x 1ø 18ø 19.2M15 x 1M15 x 1ø 20ø 14S 12Cable assembly (page 115) Cable assembly (page 115)Note: 1) to order, add a «Z» at the end of the reference.The bend relief must be ordered separately (see page 141).S 13.85 maxiS 13.84.2 maxiPanel cut-out (page 115) Panel cut-out (page 115)ECG.2G Fixed socket with two nuts, key (G), straightcontact for printed circuit (back panel mounting)EYG.2G Fixed socket, key (G), protruding shell(screw fixing on the panel)ø 19.2M15 x 13S 1712.53.5M15 x 1ø 20M13 x 0.7515.6 maxi8.5ø 14S 13.84.2 maxiPanel cut-out (page 115) Panel cut-out (page 115)PCB drilling pattern (page 115)Note: all dimensions are in millimetres.www.lemo.com111