UNIPOLE & MULTIPOLE CONNECTORS

More documents

Recommendations

Info

® ®Step 2: Select Connector SizeSelect the right connector size and insert configurationTo be able to select the right connector size (0 to 6), it is important to define the contact diameter (ø A).Find out the available contact diameter (ø A) of the LEMO connector depending on the number of contacts required anddepending on the rating required (see pages 45 to 49 and 91 to 98).The following table shows the contact diameter (ø A), or the solder pot diameter (ø C) for the 1D series.SeriesNumber of contactsInsert configuration000B-0K1B-1K2B-2K3B-3K4B-4K5B-5K000S-0E-0L 1)1S-1E-1L 1)2S-2E-2L 1)3S-3E4S-4E5S-5E6S-6E2G2CUnipole1D (ø C)Multipole11111112345678910121314161819202224263032364044485054606264721061131161201301401601123023033043053063073083093103123133143163183193203223243263303323363403443483503543603623643721061.31.62.03.0 3.04.0 4.0 4.06.0 6.00.5 0.9 1.3 2.0 3.0 6.0 0.9 1.3 1.6 2.0 4.0 6.0 1.60.5 0.9 1.3 1.6 2.0 0.7 0.9 1.3 2.0 3.0 6.0/4.0 6.0 1.30.5 0.7 0.9 1.3 2.0 3.0 4.0 0.7 0.9 1.3 2.0 3.0 4.0 8.0 1.3 0.60.7 0.9 1.3 1.6 0.9/0.7 1.3 2.0/1.3 3.0/2.0 4.0/3.00.5 0.7 1.3 1.6 2.0 0.7 1.3 1.3 2.0 3.0 1.30.5 0.7 1.3 1.6 2.0 1.3/0.9 1.3 2.0/1.30.7 0.9 1.3 0.9 1.3 1.3 3.0 0.70.5 1.3/2.0 1.30.5 0.9 1.3 1.6 3.0 0.9 1.3 1.3 2.0 0.70.7 0.9 1.3 0.9 1.3 2.0 4.0/5.0 0.70.9 1.30.5 0.7 0.9 2.0 0.9 1.3 3.0/2.0 0.70.5 0.7 0.9 0.9 2.0 0.9 0.9 2.0 3.00.7 0.9 0.9 0.9 3.0/1.6 4.0 0.70.70.7 0.9 1.6 0.9 1.6 3.00.7 0.9 3.0/1.60.7 0.9 0.9 1.6 3.00.5 0.70.7 0.9 1.3 1.3 2.00.5 2.01.3 2.0 2)0.7 1.3 1.3 2.01.30.7 1.3 1.3 2.00.90.91.61.60.9 1.31.30.912.0Note: 1) L series not available in unipole version. 2) 2.0 is for 6S series, for 6E the values are 1.3 and 5.0.6www.lemo.com
® ®Verify the fitting to your wireVerify if the selected contact diameter (ø A) of the LEMO connector fits to your cable wire diameter (AWG number ormax. available section).Contact typeContactø A ø C Form(mm) (mm) per fig.AWGmax.SolidSectionmax.(mm 2 )ConductorStrandedAWG Section (mm 2 )min. max. min. max.F r1)(N)Notefig. 1fig. 2ø Aø Aø Aø Aø Aø Aø Cø Cø Cø Cø Cø C0.5 2) 0.40 2) –0.5 0.45 –0.7 3) 0.60 3) –0.7 0.80 –0.9 0.80 –1.3 1.00 –1.6 1.40 –2.0 1.80 –3.0 2.70 –4.0 3.70 –5.0 5.20 –6.0 5.20 –8.0 7.00 –12.0 11.50 –0.5 5) 0.45 10.70.80 10.45 21.10 10.9 0.80 20.45 21.40 11.3 1.10 20.80 21.61.90 11.40 22.02.40 11.90 23.0 2.90 14.0 4.00 1Solder 28 0.09 – 30 – 0.05 –Crimp28 0.09 – 28 – 0.09 –24 0.25 – 26 – 0.14 –22 0.34 – 22 4) – 0.34 –22 0.34 – 22 4) – 0.34 –20 0.50 – 20 4) – 0.50 –16 1.00 – 18 – 1.00 –14 1.50 – 16 – 1.50 –10 4.00 – 12 – 4.00 –10 6.00 – 10 – 6.00 –– – – 8 – 10.00 –– – – 8 – 10.00 –– – – 4 – 16.00 –– – – 0 – 50.00 –– – 32 28 0.035 0.09 12– – 26 22 4) 0.140 0.34– – 32 28 0.035 0.0922– – 24 20 0.250 0.50– – 26 22 4) 0.140 0.34 30– – 32 28 0.035 0.09– – 20 18 0.500 1.00– – 24 20 0.250 0.50 40– – 26 22 4) 0.140 0.34– – 18 14 4) 1.000 1.50– – 22 18 0.340 1.0050– – 16 12 4) 1.500 2.50– – 18 14 1.000 1.5065– – 14 10 4) 2.500 4.00 75– – 12 10 4.000 6.00 90●●●●●●●●●●●●●●●●ø APrintLø Cø Aø CL dimensions and C are detailed in the section on PCB drilling pattern.See page 156 and 159.●LPrint (elbow)ø ALL dimensions and C are detailed in the section on PCB drilling pattern.See page 157 and 160.●ø CNote:1) contact retention force in the insulator (according to IEC 60512-8 test 15 a).2) for 00 multipole series.3) for S, E, 2C, 2G and 1D series.4) for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. Make sure that the maximum conductordiameter is smaller than ø C.5) for 00 multipole series or for 0B and 1B series with male contacts.www.lemo.com7
Page 1 and 2: UNIPOLE & MULTIPOLECONNECTORS
Page 3 and 4: ® ®LEMO unipole and multipole con
Page 5 and 6: ® ®3 steps to select the right co
Page 7: ® ®Definition of Ingress Protecti
Page 11 and 12: B SERIESK SERIES (watertight)
Page 13 and 14: ® ®Part Numbering SystemPlugFG G
Page 15 and 16: ® ®FFGStraight plug, non-latching
Page 17 and 18: ® ®S 1MLFMG Elbow (90°) plug, ke
Page 19 and 20: ® ®EEG Fixed socket, nut fixing,
Page 21 and 22: ® ®XPFFixed socket, nut fixing, l
Page 23 and 24: ® ®PEG Fixed socket, nut fixing,
Page 25 and 26: II® ®EPG Elbow (90°) socket for
Page 27 and 28: ® ®FGYStraight plug, keys (Y), ca
Page 29 and 30: ® ®HNG Fixed socket, nut fixing,
Page 31 and 32: ® ®Bridge modelsTechnical Charact
Page 33 and 34: δ® ®Alignment Key (B series)Alig
Page 35 and 36: ® ®Part Numbering SystemPlugFG G
Page 37 and 38: ® ®FNG Straight plug, key (G) or
Page 39 and 40: ® ®LNEEG Fixed socket, nut fixing
Page 41 and 42: ® ®PKGFixed socket, nut fixing, k
Page 43 and 44: ® ®Watertight or vacuumtight mode
Page 45 and 46: δ® ®Alignment Key (K series)Alig
Page 47 and 48: ® ®Insert configuration (B and K
Page 49 and 50: ® ®MultipoleMale solder contacts
Page 51 and 52: ® ®MultipoleMale solder contacts
Page 53 and 54: ® ®Contacts reference for plugs,
Page 55 and 56: ® ®C and K type collets for K ser
Page 57 and 58: S SERIESE SERIES (watertight)L SERI
Page 59 and 60:
® ®Part Numbering SystemPlugFFA.
Page 61 and 62:
® ®FFPStraight plug, cable collet
Page 63 and 64:
® ®FLAElbow (90°) plug, cable co
Page 65 and 66:
® ®EBSFixed socket with round fla
Page 67 and 68:
® ®PCA Free socket, cable colletR
Page 69 and 70:
I® ®RMA Free couplerReferenceDim.
Page 71 and 72:
III® ®7EPLElbow (90°) socket for
Page 73 and 74:
® ®ERN Fixed socket, nut fixing,w
Page 75 and 76:
® ®EWB Fixed socket, nut fixing,
Page 77 and 78:
® ®Part Numbering SystemPlugFFA.
Page 79 and 80:
® ®FFFStraight plug non-latching,
Page 81 and 82:
® ®EEPFixed socket, nut fixing (b
Page 83 and 84:
® ®PSAFixed socket, nut fixing, c
Page 85 and 86:
® ®SWH Fixed coupler, nut fixing,
Page 87 and 88:
® ®Part Numbering SystemPlugFG G
Page 89 and 90:
® ®FAG Fixed plug, nut fixing, no
Page 91 and 92:
® ®Watertight or vacuumtight mode
Page 93 and 94:
® ®Insert configuration (S, E and
Page 95 and 96:
® ®MultipoleMale solder contacts
Page 97 and 98:
6® ®MultipoleMale solder contacts
Page 99 and 100:
® ®MultipoleMale solder contacts
Page 101 and 102:
® ®Housings (S, E and L series)Re
Page 103 and 104:
® ®Contacts reference for fixed c
Page 105 and 106:
® ®C, K and L type collets for S
Page 107 and 108:
® ®C and K type collets for E ser
Page 109 and 110:
® ®Variant (S, E and L series)Ben
Page 111 and 112:
2G SERIES2C SERIES
Page 113 and 114:
® ®Metal housing modelsTechnical
Page 115 and 116:
® ®Contacts (2G series)Ref.ALNCon
Page 117 and 118:
® ®Tooling (2G series)Please cons
Page 119 and 120:
Page 121 and 122:
® ®Watertight or vacuumtight mode
Page 123 and 124:
® ®Collets (2C series)C and L typ
Page 125 and 126:
1D SERIES (quadrax)
Page 127 and 128:
Page 129 and 130:
® ®Insert configuration (1D serie
Page 131 and 132:
SPARE PARTS
Page 133 and 134:
® ®FGG-EGG Crimp contactsFig. 1
Page 135 and 136:
® ®GEG Notched nutø AeLModel 1ø
Page 137 and 138:
ACCESSORIESTOOLING
Page 139 and 140:
® ®BHG Plug caps, nut fixing or f
Page 141 and 142:
® ®LBRD Blanking caps for free so
Page 143 and 144:
® ®GM●Bend relief (Polyurethane
Page 145 and 146:
® ®GM●Overall bend relief for p
Page 147 and 148:
® ®GRCDouble panel washersDouble
Page 149 and 150:
S1® ®NMDCPFlat spanners for colle
Page 151 and 152:
® ®Crimping tools for electrical
Page 153 and 154:
® ®DCFExtraction tools for crimp
Page 155 and 156:
® ®K seriesSeries0K1K2K3K4K5KP1 P
Page 157 and 158:
ø 0.6ø 0.6ø Aø Aø Aø 0.6ø A
Page 159 and 160:
® ®Fixed socket with elbow print
Page 161 and 162:
® ®Fixed socket with straight pri
Page 163 and 164:
® ®Cable assembly (B, K, S and E
Page 165 and 166:
® ®Cable stripping lengths (K ser
Page 167 and 168:
® ®Cable stripping lengths for mu
Page 169 and 170:
® ®Cable stripping lengths for un
Page 171 and 172:
® ®Cable stripping lengths for mu
Page 173 and 174:
® ®Technical characteristicsOuter
Page 175 and 176:
® ®Mechanical latching characteri
Page 177 and 178:
® ®InsulatorPlastic material used
Page 179 and 180:
® ®Contact resistance with relati
Page 181 and 182:
® ®Cable fixingCables are fixed i
Page 183 and 184:
® ®E series (C and K cable clampi
Page 185 and 186:
® ®Maximum current rating for con
show all

UNIPOLE & MULTIPOLE CONNECTORS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?