contact data - PRECI-DIP SA

More documents

Recommendations

Info

CoNtact tecHNoloGYSpriNG-loaded coNtactsWWW.PRECIDIP.COm TEL +41 32 421 04 00 SALES@PRECIDIP.COmdoUBle-sided spriNG-loaded coNNectorsa solderless connecting system with double-sided pressureconnection (fig.1).worKiNG modethe conventional spring-loaded contact (slc) is mountedin a frame (housing) .the barrel has a groove behind a retention barb .the first contact surface is positioned on one side of theslc (fig. 2).the second contact surface will actuate the spring-loadedcontact. an equal contact pressure applies on both surfaces(fig. 3).fig. 1fig. 2fig. 3AvailaBilitYdouble-sided contacts have been designed to be assembledon custom design connectors or to be integrated by customerinto their own assembiles :• conctacts with outside diameter 1.8 mm with min. 4.5 mmdistance (d) between connecting surfaces (see fig. 3).• contacts with min. 0.8 mm outside diameter and min. 8 mmdistance (d) for fine pitch applications.• long stroke and high contact pressure high reliability clip contacts.please consult for more information.coNtactsdue to technical progress, all information provided is subject to change without prior notice.181
CoNtact tecHNoloGYmIL coNtactsWWW.PRECIDIP.COm TEL +41 32 421 04 00 SALES@PRECIDIP.COmINTRODUCTIONpreci-dip has tapped its unique expertise and tested know-howto develop new Mil socket contacts based on the clip technology.two socket contact technologies are available:hooded contacts using the reversed clip and hoodless contacts usingthe eagle Grip clip.these contacts have successfully passed all the qualificationtests according to as39029 and are listed on the Qpl.we are also manufacturing the correspondingprecision-machined pin contacts.Hooded coNtacts UsiNG tHe reversedclip pateNted tecHNoloGYcoNtact desiGNthe contact consists of three parts, separately manufacturedand made of different base materials. this design allows tooptimise the performance and to select the most appropriateproduction process individually:• Contact body made of machined brass• Reversed clip made of stamped and formedberyllium-copper• Protection hood made of deep-drawn stainlesssteelseparate electroplating processes of body and clip allow the bestcost-performance ratio. the assembly of the three parts is thencarried out on dedicated, fully automatic assembly lines.reversed clip contacts are presently available in size 12, 16,20 and 22. this proprietary technology, entirely developed bypreci-dip, is protected by international patents.hoodreversed clipcontact bodyAdvaNtaGes aNd cHaracteristicsin comparison with the traditional slottedcontact body, the reversed clip design hasseveral advantages:• Smaller difference between insertion and extraction force• Reduced dispersion of the force values• Better redundancy at the level of the contact point, thanksto 6 or 8 contact fingersengagement pointreversed clipavailablein sizes 12, 16, 20, 22182 due to technical progress, all information provided is subject to change without prior notice.
Page 2 and 3: WWW.PRECIDIP.COM TEL +41 32 421 04
Page 4 and 5: CONTACTS
Page 6 and 7: CoNtact TECHNoloGYsocKet coNTACT SE
Page 8 and 9: CoNtact tecHNoloGYSocKet aNd piN co
Page 12 and 13: CoNtact tecHNoloGYmil coNtactsWWW.P
Page 14 and 15: CoNtact dataStaNdard CLIPWWW.PRECID
Page 16: CoNtact dataStaNdard CLIPWWW.PRECID
Page 20: CoNtact dataStaNdard CLIPWWW.PRECID

contact data - PRECI-DIP SA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?