Specifications

These graphs are intended to give you a general idea of the performance capabilities of each product line. The shaded area of each graph represents the operating range of the productfamily, i.e., upper and lower values are shown. Therefore, depending on the exact coupling configurations selected, you can reasonably expect values to fall within the shaded area.RFIDSpecificationsRF CommunicationRange:Approximately 1"OperatingVoltage:8-24V standardPowerConsumption:1.2W MaximumCommunication:ASCII RS-232 (DB-9),USBI-Code RFID Tags:13.56 MHzISO-15693 - 112 bytesprogrammableNOTE: RFID tags not approved fore-beam or gamma sterilization.The IdentiQuik ® Series ofsmart couplings are RFID enabled couplingsused on equipment and in processes. RFIDis an automatic identification method thatrelies on remotely writing and readingdata. Smart coupling applications include:inventory level meters, medical equipmentcalibration, product protection, and manymore.Operating Temperature:32°F to 150°F (0°C to 65°C)PatentedCoupling ReadersCoupling Insertsnon-valved shownSMART COUPLINGS WITH RFIDIdentiQuik PLC SeriesIdentify misconnections: eliminate out-of-sequenceconnections or misconnections due to operator errorProtect your brand: prevent out-of-date, incorrect ormisapplied products from being usedProlong equipment life: prevent the accidental orunintentional use of harmful mediaSave time: automatic documentation of package andmedia lot numbers, date codes and moreProduct Dimensions(See drawing on page 36)TERMINATION TUBING SIZE METRIC EQ. SHUTOFF A BIN-LINE 1/4" ID 6.4mm ID iPLCDR1700400 1.39 2.78HOSE BARB 3/8" ID 9.5mm ID iPLCDR1700600 1.39 2.78TERMINATION TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A BIN-LINE 1/4" ID 6.4mm ID iPLCT2200400 iPLCDT2200400 1.00 1.38/2.05HOSE BARB 3/8" ID 9.5mm ID iPLCT2200600 iPLCDT2200600 1.05 1.74/1.87TERMINATION TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A BELBOW 1/4" ID 6.4mm ID iPLCT2300400 iPLCDT2300400 1.48 1.27/1.40HOSE BARB 3/8" ID 9.5mm ID iPLCT2300600 iPLCDT2300600 1.48 1.33/1.46All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.NOTE: I-Code SL1 tags are available for existing applications, contact the factory for assistance.PLC12 SERIESMaterials are listed on page 34.Customized parts (materials, voltage,termination, cable length, etc.)available. Call for more information.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.35