Specifications

FFC35 SERIESActual sizeFFC35 SERIESSpecificationsPressure: Vacuum to 125 psi, 8.6 barTemperature:-40°F to 280°F (-40°C to 138°C)Materials:Main components: PolysulfoneThumb latch: PolysulfoneExternal spring: 316 stainless steelO-rings: FDA Buna-NPanel mount gasket: EPDMFemale GHT gasket: FDA EPDMColor:Natural white with dark gray latchTubing Sizes: 3/4" ID, 19.0mm IDWARNING: Pressure, temperature, chemicals, and operatingenvironment can affect the performance of couplings. It is thecustomer’s responsibility to test the suitability of Colder productsin their own application conditions. Use the graphs on thefollowing page as a guide.FFC35 Series1/2" flow couplingsfeature double the flow ofthe HFC Series couplings.The FFC Series has a nonvalvedbore that increases flowand minimizes turbulence. Thepolysulfone material is able towithstand demanding applications andfeatures physical strength, chemical resistance and autoclavability.An ergonomic design and a large, shrouded thumb latch padproduce a coupling that is easy to grip and simple to operate.FeaturesNo valvesPolysulfone materialErgonomic designBenefitsExceptional flowPhysically strong and autoclavableEasy to grip, simple to operateThese graphs are intended to give you a general idea ofthe performance capabilities of each product line.Panel Mount DimensionsPANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .25 .03Gasket Thickness: .06"Mounting Hole: 1.21" diameterCoupling Spacing: 1.92" minimum.17"1.30"Non-ValvedColder's FFC35 Series couplingsfeature a wide open, straight-thruflow path.Ø 1.2164