Driving the future - Vinten Radamec

Fusion FHR-100Robotic only HeadUp to 55 kg (121 lbs)Technical SpecificationPart Number V4088-0001Height 500 mm / 19.7 "Width 220 mm / 8.7 "Length 390 mm / 15.4 "Weight20 kg / 44 lbsMaximum Payload 55 kg / 121 lbsPan Range 359˚Maximum Speed 60°/ sec- Pan/TiltMinimum Speed 0.1° / second- Pan/TiltRepeatability 3 mins of arcFixing Details 4 x M6 equally spacedon 84 mm diameter4 x M6 equally spacedon 3.3 " diameterTripod Adaptor AvailableIntegral Power Autoranging 110-240V ACSupply Unit 50/60 HzMaximum PowerPeak200 WattsPowerEIC Type A connectorLens ControlOutputsDirect to Canon or FujinonDigital Full Servo lenses via9 pin connector to lensmanufacturer standardThe Fusion FHR-100 Roboticonly head from Vinten Radamechas been designed for use asa standalone device or forseamless integration with thepedestal FP-188, integral heightdrive FPH-188 and the Bolt onHeight Drive FBH-175, wheremanual capability is not likelyto be required.The head has been developed by retainingthe drive chain and electronic componentsfrom the FH-100 Fusion Head, by removingthe manual drag and clutch mechanisms,allowing for a lighter head.The straightforward robust mechanical designand electronics provide a low cost, flexible andaccurate head, with head positioning repeatabilityof 180 Arcseconds. The integral lens drive hasautomatic configuration for directly driving anyfull servo digital Canon or Fujinon broadcast lens,further increasing the operational flexibility,The head contains its own power supply unit,allowing for mains to be taken into the head,either from the pedestal, or directly from thestudio supply.The head is compatible with the Vinten RadamecControl System, and the Vinten Radamec FusionPedestal FP-188, the Integral Height Drive andthe Fusion Bolt on Height Drive FBH-175.Key Features and Benefits+ The most affordable broadcast qualityon shot movement head+ Direct drive of all broadcast qualityfull servo digital lenses from Fujinonand Canon+ Additional mounting points forpreview monitors to further improveon shot performance16Pan and Tilt Headswww.vintenradamec.com