Driving the future - Vinten Radamec

Fusion FPH-188Integral Height Drive PedestalUp to 85 kg (187 lbs)Technical SpecificationPart Number V3952-0003Maximum Height 900 mm / 35.4 ”Travel‘On Shot’ Stroke 765 mm / 30 “Doorway Tracking 780 mm / 31 “WidthSteering Ring 635 mm / 25 “DiameterMaximum Height 150 mm / 6 “ / secondSpeed (On Shot)Weight130 kg / 286.6 lbsMaximum Payload 85 kg / 187 lbsManual Operation YesPower Consumption 500W- PeakIntegral Power Auto ranging 110-240V ACSupply Unit 50/60 HzPan and Tilt HeadsPedestalsHeight DrivesThe Vinten Radamec FusionFPH-188 Integral Height DrivePedestal has a maximumpayload of 85 kg (187 lbs),designed to support the VintenRadamec Fusion robotic headsand today’s cameras, lenses andprompters.The pedestal is a full manually operatedpedestal with an integrated height drive.The fully continuous steering capability isdelivered through the column found on theQuartz in the Vinten manual studio range,allowing studio pedestal operators to beinstantly familiar with the operating benefitsof perfect balance.The pedestal stroke range is 30" (765mm),with full crab and steering capability inmanual control.With all the on shot characteristics youwould expect the fully integral height drivepedestal has a maximum height velocity of6" (150mm) per second.The electronics are housed in easy accessmodules in the base of the pedestal, allowingboard and full pack swap out.The FPH-188 may also be upgraded to a fullyrobotic pedestal, the FP-188, through the localVinten Radamec service centre.The pedestal is compatible with all VintenRadamec heads and control systems.Key Features and Benefits+ Payload and pricing to meet theneeds of modern cameraconfigurations+ Full genuine broadcast quality onshot movement capability+ Vinten performance in manual mode+ Upgradeable to a full XY pedestal atlocal service centre+ Compatible with the Vinten RadamecControl SystemControl SystemsVirtual Tracking ReferenceRobotic Camera Control Systems29