Configuration and Options Guide - November 29 ... - IBM Quicklinks

IntelliStation Z Pro (9228) memory optionsAttention: A four-digit feature code is used to specify a component that is configurable in the IBMconfigurators, the eBusiness Configurator (eConfig) and the IBM Web-based Hardware Configurator, used inUS and Canada. Options that do not have feature codes cannot be integrated by IBM into a system usingthese IBM configurators. To purchase options separately, refer to the option part number provided in thisdocument.SBBNumberOptionNumberFeatureCodeDescriptionMemory DIMMs 1, 239M5780 - 0546 512MB PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz39M5783 - 0542 1GB PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz39M5789 - 0544 2GB PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz39M5795 - 0556 4GB PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz- 39M5782 - 1GB Kit (2x 512MB DIMM) PC2 5300 DDR2 FBD CL4- 39M5785 - 2GB Kit (2x1GB DIMM) PC2 5300 DDR2 FBD CL4- 39M5791 - 4GB Kit (2x 2GB DIMM) PC2 5300 DDR2 FBD CL4- 39M5797 - 8GB Kit (2x 4GB DIMM) PC2 5300 DDR2 FBD CL4Notes:1. DIMMs must be populated in pairs and should be populated from largest to smallest i.e.; populate 2GBthen 1GB and then 512 MB (1 pair per branch) in the following order: DIMM1 and DIMM 3, DIMM 5 andDIMM 7, DIMM 2 and DIMM 4, and DIMM 6 and DIMM 8. Populating DIMM pairs in this order willmaximize performance and also ensure that the DIMM in each channel gets populated first.2. Each DIMM in the DIMM pair must be identical (same size and speed).Chapter 3. IntelliStation Z Pro (9228) 31