vspex console and logo guidelines - EMC Community Network

PANDUIT NETSERV CABINETS FOR EMC VSPEX CONSOLESPanduit is a world-class developer and provider of leading-edge solutions that help customers optimize the physicalinfrastructure through simplification, agility, and operational efficiency. Developed to echo the “Simple, Efficient, Flexible”VSPEX message, Panduit offers validated physical infrastructures that provide every component (besides active equipment)to rapidly source and physically deploy VSPEX in optimal fashion.Available globally, Panduit’s solutions for VSPEX include the Panduit N-Series Cabinet, cable management, thermalmanagement, bonding/grounding, all fiber and copper connectivity, and mounting hardware, along with complete rackingand cabling instructions. The complete solution ensures speed, fit, performance, and scalability.Panduit’s solutions also support the VSPEX Console allowing you to maximize your company’s visibility by adding yourcompany logo to a VSPEX Console.For information please e-mail VSPEX.Info@Panduit.com and your request will be quickly answered by Panduit’s infrastructureexpert in your region.ORDERING LOGOS FOR NON-EMC CABINETS WITHOUT VSPEXILLUMINATED CONSOLESPartners that want to order VSPEX logos and their own logos for non-EMC Racks without VSPEX illuminated VSPEX Consolemay do so. VSPEX logos can be ordered from LaFrance using the information above. You may also have LaFrance or yourvendor of choice make your logo as long as it complies with the material specifications above.The VSPEX logo should be centered and at a distance of 58 inches ( 1.47 meters) from the base of the cabinet as shownin the graphic below as “C”.The top of the partner logo should be placed 1 inch (25.40 mm) below the bottom of the VPSEX Logo as shown in thegraphic below as “D”.