High pressure forged Sempell valves provide the ideal solution to ...

High Pressure Forged Gate ValvesAccessoriesAccessories1 - Bevel gear handwheel page 152 - Spur gear handwheel page 153 - Actuator page 154 - Bevel gear and actuator page 155 - Safety device, solution 1, hole in the seat ring page 96 - Safety device, solution 2, hole in the wedge page 97 - Safety device, solution 3, nozzles with caps page 98 - Safety device, solution 4, over pressure protection for two directions page 99 - Nozzle page 1010 - Nozzle with cap page 1011 - Nozzle, Connection of drain page 1012 - By-pass page 1013 - Limit switch for open or closed position page 1014 - Limit switch for open and closed position page 1015 - Locking device page 1016 - Floor stands with extension stems below the valve page 1017 - Floor stands with extension stems above the valve page 10How to orderI II III IV V VI VII VIII IX XTo ASME GA251.6013 8” 6” 14 5 BW L 5To ISO GA251.6013 200 150 14 5 BW L 5I6 = High Pressure Forged ValveII Type of Valve 01 Gate ValveIIIIVVClass2 900 - Pressure Rating 09 (PN 160)3 1500 - Pressure Rating 15 (PN 250)4 2500 - Pressure Rating 25 (PN 500)5 4500 - Pressure Rating 45 (PN 720)Connection pipe ends inches (mm)Nominal size inches (mm)VI Material specification, please refer to page 11VIIType of trim, please refer to separate page for every valve type according to point VIVIII BW Butt weld endsFR Flanges RTJBWS Butt weld ends SpecialIX L End to connections BW to Sempell standardL1 End to connections BW to ASME B16.10L2 End to connections Flanged RTJ to ASME B16.10S1 Lengths of angle valvesXAccessories number, please refer abovePentair reserves the right to change the contents without notice page 16