Electromagnetic clutches and brakes from INTORQ & magneta

INTORQ standard clutches – flange mountedType 14.105.■■ .1.■7.5 to 480NmAxially compact designBacklash-free operationVery fast response timesNo residual torqueNo running-in requiredSelectionWhilst the bearing mounted clutches 14.105.■■ .3.■are often the most economical selection, these 3-part flangemounted designs suit where axial space is limited or wherethe clutch can be effectively built into a machine design.Wherever possible shaft to shaft drives with armature 1should be avoided particularly at high speed. Offset drivesare the recommended option with pulleys or gears. Usearmature type 3 for compact custom mounting to existingcomponents, or armature type 5 to directly mount pulleysor gears.Armature 1 Assemblies Armature 3 Assemblies Armature 5 AssembliesBore Bore Rotor Armatured, d11 . d11 . bore boreType No. H7 Type No. H7 Type No. d11 d1214.105.06.1.1 10, 12, 14, 15 14.105.06.1.3 10, 12, 14,15 14.105.06.1.5 10, 12, 14,15 1214.105.08.1.1 14, 15, 19, 20 14.105.08.1.3 15,20 14.105.08.1.5 14, 15, 19, 20, 25 1514.105.10.1.1 15, 19, 20, 24, 25, 14.105.10.1.3 15, 19, 20, 24, 25, 30 14.105.10.1.5 15, 19, 20, 24, 25, 2030 3014.105.12.1.1 20, 24, 25, 28, 14.105.12.1.3 20, 24, 25, 28, 35 14.105.12.1.5 20, 24, 25, 28, 30 2530, 3514.105.16.1.1 25, 28, 30, 35, 14.105.16.1.3 25, 28,30, 35, 38, 14.105.16.1.5 25, 28, 30, 35, 38, 3038, 40, 45 40,45 4014.105.20.1.1 40, 42, 45, 50, 55, 60 14.105.20.1.3 40, 42,45,50,55,60 14.105.20.1.5 40, 42, 45, 50, 55, 406014.105.25.1.1 50, 55, 60, 65, 70 14.105.25.1.3 50, 55, 60, 65,70 14.105.25.1.5 50, 55, 60, 65, 70 45Pilot and other bores are available on request.Keyways to BS4235Electrical supplyThese units require a 24V d.c. unsmoothed supply.Ordering example(25) off clutches type 14.105.20.1.5-24V, 50mm borerotor, 40mm bore armature.Tel: 01234 753201 Techdrives Email: sales@techdrives.co.ukA1-9