OMNIPOWER Modified Sinewave Inverter - Sinetech

OMNIPOWERModified Sinewave InverterOmnipower Modified SinewaveInverter with built-in chargerHT-B- M1000 SERIESThis modified sinewave Inverter with a built-in batterycharger is suitable for most simple loads and provides aneconomical way to get instant AC power anywhere and atanytime as long as the supplied battery is fully charged.The modified sinewave inverter converts power from12VDC to 230VAC/50Hz. This inverter is specificallysuitable for small power back-up installations. Highfrequency PWM technology ensures a compact unitproviding high reliability and good performance.The inverter/charger/battery back-up system has arobust design and is quiet and portable. It can thereforebe operated in almost any internal environment. The unithas some start up capability, protection circuits againstshort circuit, reverse polarity and over load. The Inverteralso incorporates a 3 stage PWM ±10A battery charger.If AC is present the built-in battery charger will rechargea lead acid or lead calcium battery within a few hoursand then switches to float charge. The unit is now onstandby for a possible power failure. The system has afast and seamless changeover switch and is thereforesuitable for automated backup in certain applications.______________________________________________________________________________________________________________________________________Tel: (+27) 11 886 7874 Fax: (+27) 11 787 0178Randburg Garden Mall, 343 Kent Av e, Ferndale, Randburg, South AfricaP.O. BOX 785064, Sandton, South Africa 2146Email: sales@sinetech.co.za | Web : http://www.sinetech.co.za

TECHNICAL SPECIFICATIONSModel:HT-B- M1000Inverter :Output Power ContinuousMax Surge PowerOutput wave formAC Input VoltageAC Output Voltage1000VA / 1000W2000WModified Sine Wave230VAC / 50Hz230VAC / 50HzOutput Regulation when in Inverter mode ±8%Fast change overDC Nominal Input Voltage 85%No load current draw 0.6AOver Temperature protectionOverload protection / will try to restart two times, if unsuccessful, inverter will shut downOutput short circuit protection / inverter will shut downInput reverse polarity protection / fuse protected / fuse will blow *Resettable output circuit breaker for additional overload protectionOperating TemperatureHumidityBattery Charger:*Sinetech will not take any responsibility, nor consider a repair under warranty, if the system was incorrectly installed,mishandled, overloaded, exposed to the elements or the battery polarity was reversed.Please see our Warranty conditions.12V55 deg C ± 5 deg CYESYESYESYES-10 deg C - +45 deg C20% – 90% non-condensingThree stage automatic High Frequency Switch Mode Battery Charger 12V /10AAC Input ( AC Input Range ) 230VAC / 50Hz ( 180V – 265V)Charge VoltageOver Load ProtectionOver Temperature ProtectionOperating TemperatureWith isolation transformer for additional safetyRecharge time from discharged internal battery in:Miscellaneous :Auto temperature controlled cooling fan13.6V±0.5VYESYES-10 deg C - +45 deg CYESOnly 8 – 10 HrDimensions W x D x H mm 155 x 360 x 86Net weight Kg ( With packaging ) 4.5 Kg ( 5Kg )Dimensions Packed W x D x H mm 265 x 490 x 155YESSpecifications are subject to change without prior notice. E&OE accepted