Invacare® Action³®

injury to vehicle occupants still might occur in the event of acollision or other accidents and no guarantee is givenin this respect.Correct and Incorrect placements of belt (picture 21)4.3 Restraint methods (picture 22)A. Frontal restraints with straps1. Connect the frontal straps around the frontal part of theframe.2. Release brakes and tension front straps by pulling thewheelchair backwards from the rear.3. Re-apply wheelchair brakes.B. Rear restraints1. Attach the snap hooks on the rear straps to the frame justabove the rear wheel attachments.2. Tighten the straps.C. Fastening of pelvic belt and safety belt1. Check that the pelvic belt on the wheelchair is correctlyfastened.2. Fasten the 3-point safety belt over the user.If pelvic belt on the wheelchair is missing we recommend thatthe user should transfer to the seat of the vehicle, if possible.The safety belt should not be kept from the user’s body bythe parts of the wheel chair.D. Pelvic belt1. The pelvic belt is mounted on the backrest brackets(picture 23).22212313