Invacare® Action³®

- Dual handrim :Two systems allow the user to drive the wheelchair with asingle arm using two handrims on the same wheel (right orleft available).• Fixed (photo 30) : the wheel axles are fixed, folding is thesame as for a regular wheelchair.• Quick release (photo 31) : the removable and interchangeablerear wheels facilitate transport as well as thereplacement of the control side.To fold the wheelchair, disengage the transmission shaft (A)by sliding the two rings (B and B')). To facilitate this operationapply a front to rear motion to the outside handrim.To roll the folded wheelchair, separate the two wheels (onecentimetre) by pushing the buttons of quick-release axles.Make sure that the wheels are still engaged! Several types of braking adapted to your specific needsare available. Please consult with your dealer upon agreementby your prescribing physician.2.6.3 Safety options- Support belt• Velcro fastener (photo 32) : position the two Velcro stripsone over the other based upon the user’s build.• Buckle safety fastener (photo 33) : to close the buckle,engage part (A) into part (B), to open press (C).Straps should be adjusted to suit user, insert into part (B) ofthe buckle and adjust the loop (D) based on the remaininglength.! The belt fixing should be conform to the scheme enclosedwith each belt delivery; the belt should be mountedand ajusted by your regular dealer.Make sure that the belts do not get caught in the spokes ofthe rear wheel.The support belt must not be used as safety belt in a car.29CBDA30 31B' A B32 33