Invacare® Action³®

22- Swing-away and removableThis range of armrests can be swung away to facilitatetransfers and disassembling during transport.• Simple [2] (photo 15) to swing the armrest away, push downthe dog point (A), reverse the procedure to reinsert makingsure that the dog point (B) is properly engaged in its housing.To remove the armrest, swing it back completely and pull itup. Reverse the procedure to reinstall.- Ajustable tubular [3] (photo 16) :• AdjustableIdentical to the previous procedure including armrest heightand depth adjustment ; slightly loosen the ball screw (B), adjustfor the desired height based upon the preset holes and firmlytighten the screw ; slightly loosen the two screws (C) andslide the armrest down for the desired depth, firmly tightenthe two screws (C).- Adjustable monobloc [5] (photo 17) :To swing the armrest away, activate the grey trigger (A). Toautomatically reinsert it swing it down and make sure that theguide (B) is properly engaged in its housing.To adjust the armpad in height and depth, proceed as theadjustable tubular armrest procedure.Note : the armrests are mounted in pairs on the wheelchair ;whenever you remove them, remember that you have a rightand a left side !! Never lift the wheelchair by the armrests !Keep your fingers away from movable parts during folding,disassembling or adjustment to prevent injuries !ACAB 15 B16 B17