12.07.2015 Views

2013 AMA Supercross an FIM World Championship Rulebook

2013 AMA Supercross an FIM World Championship Rulebook

2013 AMA Supercross an FIM World Championship Rulebook

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

a. The maximum sound limit is set at:1. For pre-race inspectionMax. 115 dB/A2. For post-race inspectionMax. 116 dB/ANOTE: For 2014 thru 2017 the Maximum sound limit will be setat:1. For pre-race inspectionMax. 112 dB/A2. For post-race inspectionMax. 113 dB/Ab. All competitors entered may be sound tested at <strong>an</strong>y time.When directed by <strong>an</strong> Official, the rider must proceed directly tothe designated sound test area; failure to do so will result in apenalty.c. The normal penalty for violation of the post-race or qualifyingsound limit will be:1. Qualifying: Loss of fastest qualifying time.2. Heat races or LCQ: Loss of three positions3. Main Events: Loss of three positions in the final st<strong>an</strong>dings.Points <strong>an</strong>d purse will be adjusted accordingly.d. A fine may be added to the listed penalties at <strong>an</strong>y time.e. If, in the judgement of the Race Director, the post-race orqualifying sound limit violation was unintentional <strong>an</strong>d/or causedby <strong>an</strong> accident <strong>an</strong>d the violation did not enh<strong>an</strong>ce theperform<strong>an</strong>ce of the motorcycle, the penalty may be waived.1.6 Framea. The main frame must be the same as <strong>an</strong> originallyhomologated model of the same m<strong>an</strong>ufacturer.b. Cracked or broken frames are prohibited.c. Strengthening gussets or tubes may be added, but none maybe removed.d. All st<strong>an</strong>ds must be removed.e. All footrests must fold to a 45-degree <strong>an</strong>gle.f. The maximum length of the footrest from the pivot point is 5inches.g. Footrests may be raised or lowered, but c<strong>an</strong>not be lower th<strong>an</strong>the bottom frame tube.h. Accessory brackets (for radiator, coil, shock reservoir, etc.)may be ch<strong>an</strong>ged, relocated or removed.i. Engine mount location, steering head location <strong>an</strong>d <strong>an</strong>gle,swingarm pivot point, <strong>an</strong>d rear suspension linkage point mustbe the same as the homologated model.j. The use of offset bearing races for the purpose of altering thesteering <strong>an</strong>gle is permitted.k. Subframes may be replaced with aftermarket units of steel,aluminum or tit<strong>an</strong>ium provided they are similar in design to theproduction part <strong>an</strong>d utilize original mounting points.8

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!