A G C O C utting P arts - AGCO Parts

SICKLE ASSEMBLIES FOR MASSEY FERGUSONCOMBINES: 410, 510, 540, 550, 750, 760 with Rigid Header 1859Bolt-On Riveted Replacement for Sickle Number of Type of OEM Section Section OEMPart No. Part No. OEM Part No. Length Sections Section Part No. Part No. Head No.801-338 800-338 260611M94 13 ft. 51 H TS PL 146503M2 412-032 239481M92801-339 800-339 260620M94 15 ft. 59 H TS PL 146503M2 412-032 239481M92801-341 800-341 260629M94 20 ft. 79 H TS PL 146503M2 412-032 239481M92801-440 800-440 260632M94 24 ft. 95 H TS PL 146503M2 412-032 239481M92Note: 148357M91 Knifehead Spring attached to sickle.Position the knife drive head segment, center segmentor segments (for sickle lengths above 13'6) and endsegment in the correct order.Install sections inproper position.Place top splice (marked top) withcountersink holes up.Install nuts with taper going down intotop splices. Tighten to 9 ft. - lbs.Position bottom splice(marked bottom) withcountersink holes down.Install splice bolts from bottom. Use allenwrench (enclosed) to hold splice bolts fromturning while installing nuts.COMBINES: 410, 510, 540, 550, 750, 760 with Rigid Header 1859Segmented AssembliesReplacement Headless Head Center Center Tail Tail Splice SpliceFor One- Sickle Section Type of Segment Segment Segment Segment Segment Segment Kit KitPiece Knife Length Part No. Section Part No. Quantity Part No. Quantity Part No. Quantity Part No. Quantity260611M94 13 ft. 206236M1H H BT BM 803-157 1 - - 803-159 1 711-012 1260620M94 15 ft. 206236M1H H BT BM 803-157 1 803-158 1 803-160 1 711-012 2260623M94 16 ft. 206236M1H H BT BM 803-157 1 803-158 1 803-161 1 711-012 2260626M94 18 ft. 206236M1H H BT BM 803-157 1 803-158 1 803-162 1 711-012 2260629M94 20 ft. 206236M1H H BT BM 803-157 1 803-158 2 803-163 1 711-012 3260632M94 24 ft. 206236M1H H BT BM 803-157 1 803-158 2 803-162 1 711-012 3Must be purchased in individual segments. Only available in specified sections as listed. Segments are UPS shippable.40 See page 1 for abbreviation explanations. See page 3 for packaging info.