TSP-jr Almen Gage - Electronics Inc.
TSP-jr Almen Gage - Electronics Inc.
TSP-jr Almen Gage - Electronics Inc.
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Common limits of pre-bow (flatness)MIL-S-13165 0.038mm or 0.0015” Grade 3 or 2 <strong>Almen</strong> stripSAE J 442 0.0254mm or 0.001” Grade A1 <strong>Almen</strong> stripSAE AMS 2432 0.0127mm or 0.0005” Grade A1-S <strong>Almen</strong> strip3. General InformationA Placement of strip onto gage for correct reading—the indicator tip touches the nonpeenedside of the strip. This should always give a positive reading.correctincorrectB. Place an <strong>Almen</strong> strip onto the holder. Be sure the attachment screws are secure and thatno shot or other contamination is beneath the strip. Be sure the pre-bow measurements aremarked on the strip on the side facing down (not to be blasted).4