12.07.2015 Views

LX-PR103B PIR SENSOR

LX-PR103B PIR SENSOR

LX-PR103B PIR SENSOR

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>LX</strong>-<strong>PR103B</strong> <strong>PIR</strong> <strong>SENSOR</strong>Welcome to use <strong>LX</strong>-<strong>PR103B</strong> Infrared sensor switch!This product is a brand new digital energy-savinglighting switch, it adopts high sensitivity detector, MCUcontrol, SMT; It gathers automatic, convenient,safety,energy saving ,anti-disturbance and practicalfunctions ; The wide detection range is made up of theup and down, left and right detection field; It utilizes theinfrared energy from Human Body as the control-signalsource, When one enters the detection field, it will startthe controlled load; It can identify day and nightautomatically; Its installation is convenient and itsdetection range is wide; It has the functions of the powerindication and the detection indication.Specification:Power source:100-277VACPower frequency:50/60HzLight-control: it can be customized to your needsTime setting: Delay time can be set by the key or remotercontroller 3MIN-30MIN,with 3min as the unit(3,6,9...)(it can be customized to your needs)Rated load: 2000W Max.tungsten(200-277V/AC)800W Max.fluorescent(200-277V/AC )800W Max.tungsten(100-130V/AC)200W Max.fluorescent(100-130V/AC )Detection range:13m max(24°C~26°C)Detection angle:360°,Depression angle:120°Working temperature:-10~40°CWorking humidity:


Control buttonIndicatorFunction testTime setting :The default delay time is 3mins ,you can adjust the time by pressing the button .and for each time,theindicator will flash once ,and the time will add 3mins ,when you press for 11 times ,the time will be set to3mins again.20sec after you stop inputting , the led flash for 5 times indicating time set finished.in this time mode, ifyou do not input time,then the system enters into the test mode that will lasts for 10mins .Test mode:Press the button till the led flash twice ,then loosen the button .10secs later, the led flash for 5 timesindicating the system is in test mode. in this mode ,regardless of day or night, when it receives signal ,thelamp will light on for 10secs.10 mins later ,it will quite this mode.FOR OCCASIONSThe Control Switching Devices,installed in thenonmetallic objects.Can be widely used in home\market\officebuilding\factory\hotel\institution etc.Living room HotelsOffice Meeting Room

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!