Jabcore Classic Hardcore Replacement - Jablite

More documents

Recommendations

Info

7.3JABCORE PREMIUM 70 & 100DECLARATION OFPERFORMANCENo: 037888010001 Unique identification code of the product-type: Jabcore Premium 70 & 1002 Type, batch or serial number or any other element allowing Grade EPS 70 & 100identification of the construction product as requiredpursuant to Article 11(4) of the CPR:3 Intended use or uses of the construction product, in EPS lightweight fill material designed to replaceaccordance with the harmonised technical specification,onventional hardcore in domestic groundas foreseen by the manufacturer:floor constructions.4 Name, registered trade name or registered trade mark Jablite Ltd, Infinity House,and contact address of the manufacturer as requiredAnderson Way, Belvedere,Kent, DA17 6BG5 Where applicable, name and contact address of the Not Applicableauthorised representative whose mandate covers the tasksspecified in Article 12(2):6 System or systems of assessment and verification of AVCP System 3constancy of performance of the construction product asset out in Annex V:7 In case of the declaration of performance of the British Board of Agrément;construction product covered by a harmonised standard: BRE (RtF)- name and number of notified body:- performed: Thermal ConductivityReaction to Fire- under system: 3- and issued: -Declared PerformanceEssential Characteristic Performance Harmonised technical standardLength and Width L3 & W3 BS EN 13163:2012Thickness T2 BS EN 13163:2012Squareness Sb5 BS EN 13163:2012Flatness P30 BS EN 13163:2012Reaction to Fire Euroclass F. BS EN 13501-1:2007 +A1:2009Euroclass E is available to orderThermal Conductivity λD 0.032W/mK BS EN 13163:2012Thermal Resistance See Table 3 – BS EN 12667:2001Thermal ResistanceCompressive Strength at 10% deformation CS(10)70 & CS(10)100 BS EN 13163:2012Compressive Creep cc(2/1.5/50)0.3σ 10BS EN 13163:2012Water Vapour Transmission 20-40µ (EPS70) 30-70µ (EPS100) BS EN 12086:2013Dimensional Stability DS(N)5 BS EN 1603:2013Floors | Walls | Roofs Jablite Jabcore Technical Information 26
Thermal Resistance – Table 3Nominal Board Thickness 100 Classic (m²K/W)25mm 0.781330mm 0.937540mm 1.250050mm 1.562560mm 1.875075mm 2.3438100mm 3.1250120mm 3.7500150mm 4.6875200mm 6.2500The performance of the product identified in points 1 and 2 is in conformity with the declared performance.This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4.On behalf of the manufacturer by:Wayne Brown, Manufacturing DirectorBelvedere – 1st July 2013Floors | Walls | Roofs Jablite Jabcore Technical Information 27
Page 1 and 2: JabliteJabcoreTechnicalInformation
Page 3 and 4: 1.0JABLITE JABCORE CLASSICConcrete
Page 5 and 6: included. For buildings such as ter
Page 7 and 8: 2.0JABFLOOR CLASSIC DATASHEETJabflo
Page 10 and 11: StorageStore Jablite boards under c
Page 12 and 13: PermanentJabfloor Premium is rot-pr
Page 14 and 15: 4.0JABFLOOR PREMIUM DATASHEETJabflo
Page 19 and 20: It is a pre-requisite of BREEAM tha
Page 21 and 22: 7.0 APPENDICES
Page 23 and 24: Thermal Resistance - Table 3Nominal
Page 25: Thermal Resistance - Table 3Nominal
Page 29 and 30: 3 HAZARDS IDENTIFICATIONHuman Healt
Page 31 and 32: Storage should be in a level situat
Page 33 and 34: 15 REGULATORY INFORMATIONEC Label N
Page 35 and 36: Certificate No: FM 01260LocationJab
Page 37 and 38: Certificate No: EMS 559414LocationJ
Page 39: For more informationabout Jablite:0

Jabcore Classic Hardcore Replacement - Jablite

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?