Sheen_Catalogue AW.indd

Taber Abraser
This typical machine is useful to evaluate the wear resistance
of numerous materials: coatings, textile, leather, rubber,
plastic, wood, glass, paper etc. The sample is fastened
onto a turntable rotating at constant speed whilst driving
2 abrasive wheels. The results vary according to the load
applied and the wheels used. They range from mild to
coarse abrasion, and are made of felt, rubber, sand paper,
vitrified clay, or tunsten carbide.
Various optional accessories to extend test fields available
on request:
24
abrading wheels - Grit feeder allows specific test by
feeding and removing aluminium oxide grit onto the sample.
Multi-media attachment: recreates wear caused by liquids,
fluids and powder, to evaluate abrasivity of materials e.g.
paints, pigments, adhesives, pastes, etc.
Specific specimen holders
Wheel refacer: to dress the contact surfaces of wheels
Calibration kit: to verify operating parameters including
arm alignment, wheel tracking, vacuum suction force
Ordering references
Taber Abraser - 230/110 V – 50/60 Hz
5135 Taber abraser, single-head
5155 Taber abraser, dual-head
5535 Taber Multi-media abraser, single head
5555 Taber Multi-media rotary abraser, dual head
5556 Taber Multi-media abraser, dual head
Standards
Complies to numerous aSTM, CCC, din, en, iSo, JiS, Mil,
nf, Sae, SiS, Tappi, une standards.
please consult with Sheen instruments, for your rquirements
Taber Linear Abraser
a special machine to evaluate abrasion resistance and
related properties of numerous finished products of any
shape or size: flat, concave or convex. it is equipped with a
reciprocating beam holding a floating head to follow sample
contours.
adjustable stroke length, speed and load, combined with
various optional tools for testing abrasion, scratch, coinscrape
or Crocktest extend its application fields.
Ordering references
Taber Linear Abraser - 230/110 V – 50/60 Hz
5750 Taber linear abraser
Standards
aSTM d6279, d2197, d5178
iSo 105/X12