Sheen_Catalogue AW.indd

Physical testing
15.0
TeMperaTure, pH, ConduCTiViTY
Pocket Thermometer HI-151
a handy thermometer, with integral probe. automatic switch
on when probe is fold-out, and off when fold-in. automatic
calibration and battery check. Suitable for fi eld and lab use.
Features
range: -50.0° to 220.0° C, 0.1° C resolution (200° C)
accuracy @20° C: ±0.4° C, ±1 digit
Standard delivery: thermometer, 1 x 1.5V aa batteries
Ordering reference
Pocket Thermometer
Hi-151 pocket Thermometer
Conductivity Meter LC2
This conductivity meter has been developed in co-operation
with the Vda, association of German automotive industry.
its tube electrode concentric geometry and stainless steel
polished surface is specially designed for measuring the
specifi c resistance of solvent based paints, to determine
their application and performance. The measurement is
performed by dipping the cell into the test sample. The
reciprocal value of the resistance related to the cell constant
indicates the conductivity.
Features
easy to clean 2-co mponent electrode
Solvent resistant housing, dedicated to solvent environment
powered by a 9 V battery
Performance
range: 50 kΩ – 19.99 MΩ, measuring voltage 15 V (aC/dC)
Cell length 380 mm, 50 mm, contant C=7.55 x 10-3 cm-1
Ordering reference
Conductivity Meter
BG1722 Heavy duty Conductivity Meter
(probe not included)
BG1710 Conductivity electrode (probe)
40
Standards
aSTM d5682
din 55667
Pocket Conductivity Meter HI-98311
This pocket eC/TdS meter features automatic temperature
compensation / calibration, user adjustable conversion
and temperature coeffi cient factors, replaceable graphite
electrode resistant to salt contamination.
Features
range:
- eC: 0 – 3999 μS/cm (resol. 1 μS)
- TdS: 0 – 2000 ppm (resol. 1 ppm)
- Temp. : 0.0° to 60.0° C
accuracy @20° C, eC/TdS: 2% full scale, T°: ±1.0° C
Calibration eC/TdS: auto, 1 point @ 1413 μS/cm
Conversion factor eC/TdS: adjustable 0.45 – 1.00
Temp. compensation: adjustable 0.0 – 2.4 per °C,
0.1 increment
Standard delivery: Meter, probe, 4 x 1.5V batteries,
electrode replacement tool
Ordering reference
Pocket Conductivity Meter
Hi-98311 pocket water-proof pH meter
Conductivity Meter HI-93300
This hand held unit features conductivity measurement
from 0.1 μS to 200 mS with 1 probe. 4 stainless steel
concentric rings on the probe shaft combined with a built-in
temperature sensor automatically compensate all readings.
no need to change probe, cell constant or re-calibrate.
Features & performance
ranges:
- μS/cm: 0.0 – 199.9 / 0 - 1999
- mS/cm: 0.0 – 19.99 / 0 – 199.9
accuracy @20° C : 1% of full scale
(excluding probe deviation)
Calibration: manual single point through trimmer
Temperature compensation: 10 – 40° C
Standard delivery: meter with rubber waterproof keypad,
probe, wrist-strap, battery, carry case
Ordering reference
Conductivity Meter
Hi-93300 Water-proof Conductivity Meter