12.07.2015 Views

ShellSol T - Europe

ShellSol T - Europe

ShellSol T - Europe

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Data SheetProduct NameIssued:28-Nov-2007<strong>ShellSol</strong> TProduct CodeQ7412<strong>Europe</strong>Product CategoryIsoparaffinsCAS Registry Number 64741-65-7EINECS Number 265-067-2DescriptionTypical Properties<strong>ShellSol</strong> T is a synthetical isoparaffinic hydrocarbon solvent, characterised by alow odour.Property Unit Method ValueDensity @15°C kg/l ASTM D4052 0.761Cubic Expansion Coefficient @20°C (10^-4)/°C Calculated 10Refractive Index @20°C - ASTM D1218 1.425Color Saybolt ASTM D156 +30Bromine Index mg Br/100g ASTM D2710 400Copper Corrosion (3hr @100°C) - ASTM D130 1Doctor Test - ASTM D235 NegativeDistillation, IBP °C ASTM D1078 189Distillation, DP °C ASTM D1078 215Relative Evaporation Rate (nBuAc=1) - ASTM D3539 0.08Relative Evaporation Rate (Ether=1) - DIN 53170 110Antoine Constant A # kPa, °C - 6.71506Antoine Constant B # kPa, °C - 2009.16Antoine Constant C # kPa, °C - 241.891Antoine Constants: Temperature range °C - +40 to +140Vapor Pressure @0°C kPa Calculated 0.03Vapor Pressure @20°C kPa Calculated 0.11Saturated Vapor Concentration @20°C g/m³ Calculated 8Paraffins % m/m GC > 98Naphthenes % m/m GC < 2Aromatics mg/kg SMS 2728 100Benzene mg/kg GC < 3Sulfur mg/kg SMS 1897 < 0.5Flash Point °C ASTM D93 61


Auto Ignition Temperature °C ASTM E659 430Explosion Limit: Lower %v/v - 0.6Explosion Limit: Upper %v/v - 6.0Electrical Conductivity @20°C pS/m - < 1Dielectric Constant @20°C - - 2.1Aniline Point °C ASTM D611 85Kauri-Butanol Value - ASTM D1133 26Pour Point °C ASTM D97 < -50Surface Tension @20°C mN/m Du Nouy ring 24Viscosity @25°C mm²/s ASTM D445 1.9Hildebrand Solubility Parameter (cal/cm³)^½ - 7.35Hydrogen Bonding Index - - 0Fractional Polarity - - 0Heat of Combustion (Net) @25°C kJ/kg - 45500Specific Heat @20°C kJ/kg/°C - 2.0Thermal Conductivity @20°C W/m/°C - 0.13Molecular Weight g/mol Calculated 171(#) In the Antoine temperature range, the vapor pressure P (kPa) at temperature T (°C)can be calculated by means of the Antoine equation: log P = A - B/(T+C)Test MethodsCopies of copyrighted test methods can be obtained from the issuing organisations:American Society for Testing and Materials (ASTM)Deutsches Institut für Normung (DIN): www.astm.org: www.din.deShell Method Series (SMS) methods are issued by Shell Golabl SolutionsInternational B.V., Shell Research and Technology Centre, Amsterdam, TheNetherlands. Copies of SMS can be obtained through your local Shell Chemicalscompany.For routine quality control analyses, local test methods may be applied that aredifferent from those mentioned in this datasheet. Such methods have been validatedand can be obtained through your local Shell Chemicals company.QualityHazardInformationStorage andHandling<strong>ShellSol</strong> T does not contain detectable quantities of polycyclic aromatics, heavymetals or chlorinated compounds.For detailed Hazard Information please refer to the Material Safety Data Sheet onwww.shell.com/chemicals.Provided proper storage and handling precautions are taken we would expect<strong>ShellSol</strong> T to be technically stable for at least 12 months. For detailed advice onStorage and Handling please refer to the Material Safety Data Sheet onwww.shell.com/chemicals.


WarrantyAll products purchased or supplied by Shell Chemicals are subject to terms andconditions set out in the contract, order acknowledgment and/or bill of lading. ShellChemicals warrant that their product will meet those specifications designated assuch herein or in other publications. All other information including that herein,supplied by Shell Chemicals is considered accurate but is furnished upon the expresscondition that the customer shall make its own assessment to determine the products'suitability for a particular purpose. Shell Chemicals make no other warranty eitherexpressed or implied, regarding such other information, the data upon which thesame is based, or the results to be obtained from use thereof; that any products shallbe merchantable or fit for any purpose; or that the use of such other information orproduct will not infringe any patent.The expression ‘Shell Chemicals’ refers to the companies of the Shell Group that areengaged in chemical businesses. Each of the companies that make up the ShellGroup of companies is an independent entity and has its own separate identity.Trademark<strong>ShellSol</strong> is a Shell Trademark.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!