gamma/ L and Sigma with PROFIBUS - ProMinent

More documents

Recommendations

Info

Installation of the GSD file in Step 7 Manager3. Select the correct CPU.When selecting the correct CPU the software versionthat is imprinted on the CPU and the order numberhelp.Click the [Next>] button.ðThe window “Which blocks do you want to add?” will be displayed:4. Always place a check mark for option block OB1.5. If the function will be called in selectable time intervals, in additionselect OB35 with a check mark (the operation blocks can varydepending on CPU).A more precise description of the performance scopeof the CPU is in your operating manual.6
Installation of the GSD file in Step 7 Manager6. Click the [Next>] button.ðThe window “What do you want to call your project?” will bedisplayed:7. After a project name has been entered (in this case “Profibus_Delta”),click the [Finish] button.ðThe Simatic Manager window will open - see the followingchapter.1.2 Install GSD fileFig. 1: Simatic Manager with main window with navigation bar7
Page 1 and 2: Installation and configuration manu
Page 3 and 4: Table of contentsTable of contents1
Page 8 and 9: Installation of the GSD file in Ste
Page 10 and 11: Installation of the GSD file in Ste
Page 12 and 13: Integrating the device and the func
Page 29 and 30: Function blocks for gamma/L and Sig
Page 45: Function blocks for gamma/L and Sig

gamma/ L and Sigma with PROFIBUS - ProMinent

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?