Fast Fitting Spec Sheet.pdf - Blazing Products
Fast Fitting Spec Sheet.pdf - Blazing Products
Fast Fitting Spec Sheet.pdf - Blazing Products
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Blazing</strong> <strong>Fast</strong> <strong>Fitting</strong>s Clampless <strong>Fast</strong> <strong>Fitting</strong> <strong>Spec</strong>s• Max Operating Pressure: 80 PSI for #80pipe; 100 PSI for #100 pipe; 160 PSIfor #160 pipe.• Suggested Operating Pressure: 10-80 PSI• Burst Pressure: Exceeds 450 PSI (Thisproduct is not intended to be used onMain Lines or under constant pressure)• Body Material: ABS• Lock Ring Material: Proprietary• O-Ring Material: EPDM• Flow Rates are comparable to traditionalinsert fittings.•Friction Loss is comparable to traditionalinsert fittings.Fully Tested• Tested to pressures over 400 PSI and putthrough vigorous on/off cycling in excessof 250,000 cycles.• <strong>Blazing</strong> <strong>Products</strong> has field tested all <strong>Fast</strong><strong>Fitting</strong>s with contractors throughout theUnited States. <strong>Fast</strong> <strong>Fitting</strong>s are notintended to be used on Main Lines or underconstant pressure. Over time, pipes underconstant pressure expand, reducing theamount of pressure the lock ring isapplying to the pipe.Warranty Info• <strong>Blazing</strong> <strong>Fast</strong> <strong>Fitting</strong>s are covered by aone year limited warranty.• <strong>Blazing</strong> <strong>Fast</strong> <strong>Fitting</strong>s are for use on allManufacturers’ NSF #80, #100, or #160Poly Pipe. <strong>Blazing</strong> <strong>Products</strong> does notwarranty <strong>Fast</strong> <strong>Fitting</strong>s used on Non-NSFPipe.• <strong>Blazing</strong> <strong>Fast</strong> <strong>Fitting</strong>s are guaranteed forpressures up to the rating of the pipe.ex. 100 PSI on #100 pipe.• DO NOT use on Main Lines without amaster valve. <strong>Blazing</strong> <strong>Fast</strong> <strong>Fitting</strong>s are forlateral lines only unless a master valve isused.• DO NOT use pipe dope or other sealantson <strong>Blazing</strong> <strong>Fast</strong> <strong>Fitting</strong>s. <strong>Blazing</strong> <strong>Products</strong>recommends using only Teflon Tape onthreaded connections.• DO NOT use torches to warm the pipewhen using <strong>Blazing</strong> <strong>Fast</strong> <strong>Fitting</strong>s. Heatingthe pipe can cause irregularities in thepipe and can cause brittleness over time.• DO NOT use <strong>Blazing</strong> <strong>Fast</strong> <strong>Fitting</strong>s in conjunctionwith compressed air or gasses.• DO NOT use any grease, oil, or solventto lubricate <strong>Blazing</strong> <strong>Fast</strong> <strong>Fitting</strong>s.Eco-Friendly<strong>Blazing</strong> <strong>Fast</strong> <strong>Fitting</strong>s are made of highimpact ABS and contain no metal orchloride like other fittings on the market,making them the most eco-friendly fittingson the market.<strong>Blazing</strong> <strong>Products</strong>, Inc. • St. Louis, Missouri USA www.<strong>Blazing</strong><strong>Products</strong>.com 1-877-304-2111
Change language