Big Foot Support System - API of NH

RE-ROOFINGThe Big Foot Systemlegs may be removedindividually for re-roofing/refurbishment, withoutremoving the equipment.BenefitsHEIGHT ADJUSTMENTThe legs incorporateover 100mm (4in) ofvertical height adjustment,to take up variations in theroof. (300mm (1ft): steppedroof option).AV MATSTOTAL LEG HEIGHT: 375mm(575mm/1.9ft: stepped roof option)HEIGHT ADJUSTMENT:245mm – 350mm (0.8ft – 1.1ft): floor to framework(245mm – 550mm/0.8ft – 1.8ft: stepped roof option)SETS THE STANDARD!48 HOUR DESIGN SERVICE – LET US DO THE WORKSPREADS THE WEIGHT OF THE SUPPORTED PLANTEACH FOOT CAN BE REMOVED INDIVIDUALLY TO ALLOW EASY ACCESS TOTHE ROOF SURFACE DURING RE-ROOFING OR REFURBISHMENT WITHOUTREMOVING EQUIPMENTNO PENETRATION OF THE WATERPROOF MEMBRANE, ELIMINATINGANY DIFFICULT DETAILING, THEREFORE REDUCING THE RISK OF LEAKSCONDENSER CLAMPSThe repositionable clampslocate on both sides ofthe cross-bars, lockingdown onto the feet ofthe condenser units asthey are tightened.LINEAR ADJUSTMENTThe cross-bars whichsupport the condenserunits can slide along theplain bars into the positionrequired, then are lockedsecurely in place.Large Stud (440mm/1.4ft)can be purchased as an extraindividual component if required.COST EFFECTIVECOMPLETE ON-SITE FLEXIBILITY BOTH DURING AND AFTER INSTALLATIONFLATPACK SYSTEM FOR EASY TRANSPORTHOT DIPPED GALVANIZED METALWORKWALLLEG & BRACKETPOSITIONINGThe leg & bracket areusually positioned outsidethe framework, but canbe positioned inside if thereis an obstruction.ELIMINATES THE RISK TO ROOF GUARANTEEIMPORTANT: The purchaser or installer of theseproducts must satisfy themselves that the roof structureis of sufficient strength to take the combined weight ofthe Big Foot System and units.6 | BIG FOOT BIG FOOT | 7