Product Data Sheet: DUROPAL Worktops

Product Data Sheet: DUROPAL WorktopsMinimum production volumesStandard width Strength in mm Minimum order of format 4,100 mm600 mm (post-forming on 1 side) 28/38900 mm (post-forming on 1 side) 28/381200 mm (post-forming on2 sides)640 mm (post-forming on2 sides)670 mm (post-forming on2 sides)900 mm (post-forming on2 sides)1000 mm (post-forming on2 sides)28/3828/38383828/3824 pieces (increment of 12 pieces pervariant)12 pieces (increment of 6 pieces pervariant)12 pieces (increment of 6 pieces pervariant)24 pieces (increment of 12 pieces pervariant)24 pieces (increment of 12 pieces pervariant)12 pieces (increment of 6 pieces pervariant)12 pieces (increment of 6 pieces pervariant)Minimum order of format5,300 mm16 pieces (increment of 8 piecesper variant)8 pieces (increment of 4 piecesper variant)8 pieces (increment of 4 piecesper variant)16 pieces (increment of 8 piecesper variant)16 pieces (increment of 8 piecesper variant)8 pieces (increment of 4 piecesper variant)8 pieces (increment of 4 piecesper variant)Applies for V20E1 / P3 base materialDeviating formats and base materials on requestDelivery periodBy agreementTerms and Conditions Governing Prices and DeliveryOn requestTechnical serviceOn request, we can send you our DUROPAL Technology Brochure as a pdf file.Standards / Certif ications EN438, ISO 13894Useful informationLeaflets, GKV / ICDLI processing recommendationsGKV Web site: http://www.laminate-info.biz/deICDLI Web site: http://www.icdli.comArnsberg, 10.03.2008DUROPAL Product Management HPL / HPL ElementsPage 2 of 2DUROPAL GmbH • 59759 Arnsberg • Tel.: +49(0)2932-302-0 • Fax: +49(0)2932-302-341www.duropal.com • info@duropal.comStatus May 2008