Product Data Sheet: DUROPAL Worktops
Product Data Sheet: DUROPAL Worktops
Product Data Sheet: DUROPAL Worktops
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Product</strong> <strong>Data</strong> <strong>Sheet</strong>: <strong>DUROPAL</strong> <strong>Worktops</strong>Duropal high-pressure laminates (HPL) combined with E1 raw particle board result in high-quality worktops which are ideal forwithstanding high loads. The various profile variants enable Duropal worktops to be varied depending on the specific application anddesign requirements – from classic to modern. Our worktops are available in four different profile variants.<strong>Product</strong> advantages<strong>Product</strong> applications<strong>DUROPAL</strong> decors<strong>DUROPAL</strong> collectionsProfile drawingsPlease refer to <strong>DUROPAL</strong>-HPLWeltFurniture and interior design, kitchens, office/shop design, nursing facilities, laboratories, tables,partition elementsIn accordance with the Duropal Collection; please refer to the <strong>DUROPAL</strong> HPLWelt and Web sitewww.duropal.com<strong>DUROPAL</strong> Worktop CollectionIf required, specially-developed water drip groove on the worktop underside in the case of Classic/Quadra profiles.SpanplattenträgerRückseitewasserabweisendeBeschichtungClassic-Profil Quadra-Profil PUR-SchmelzkleberversiegelungVorderseite HPLWasser-Profil Eckig gefrästWorktop underside: plastic foil to protect against moisture, glued for water resistance, sealed at the transition to the HPL with polyurethane.Formats:<strong>Product</strong>/QualityClassic profile 6.0Quadra profile 3.0Water profileAngularmillingBoard strength inRadiusin mm Surfaces Formats in mmmm ²)Length Width 28 38 49 5810.5 /13.0-VV, TC,MP, TR,PF, HS 1) ,SM, MS,CTVV, TC,MP, TR,PF, HS 1) ,SM, MS,CTVV, TC,MP, TR,PF, HS 1) ,SM, MS,CTVV, TC,MP, TR,PF, HS 1) ,SM, MS,CT5300 /41005300 /41005300 /41005,300 /4,100Rounded onone side:600 / 900 /1200Rounded onboth sides:640/670/900/1000Rounded onone side: 600/ 900 / 1200Rounded onboth sides:640/670/900/1000Rounded onone side: 600/ 900 / 1200600 / 900 /1200• •• • • •• •• • • •CT (Crystal Stone) – stone structure - fine glossand a feeling of liveliness. Suitable for both verticaland horizontal applications.HS (High-gloss Special) – smooth structure – extravagantmirror effect, significantly improved surface asregards abrasive loads; for horizontal applications.MP (Miniperl) – pearl structure – universal, neutraland non-directional structure with unobtrusivegloss. For high-stress areas in vertical andhorizontal applications; particularly resistant tofingerprints.PF (Perfect Finish) – deckle-edged structure –ultra-fine non-directional structure. Refractivelight effect. For both horizontal and verticalapplications.SM / MS (Silky Matt / Silky Matt Special) –smooth structures – these surfaces are distinguishedby their pleasantly soft and natural feel. MS:significantly improved surface as regards abrasivestress.TC (Top Face) – pearl structure – structure withhigh gloss. Universally applicable neutral and idealsurface. TC is a classic for worktops as this surface isparticularly resistant to fingerprints.TR (Trevista) – wood structure – strong, directionalwooden pores similar to oak pores. For horizontaland vertical applications.VV (Top Velvet) – deckle-edged structure –elegantly matt, smooth and fine structure, sensitivedesign, with fine gloss effect. Recommended forhorizontal and vertical applications.1) HS surface only available at a length of 4100 mm 2) Base material P2 / V20E1, P3 / Hydrofuge3) Tolerance details apply for widths of 600 mm; for each additional 100 mm width: ± 0.05 mmGluing: D3, to DIN EN 204Page 1 of 2<strong>DUROPAL</strong> GmbH • 59759 Arnsberg • Tel.: +49(0)2932-302-0 • Fax: +49(0)2932-302-341www.duropal.com • info@duropal.comStatus May 2008
<strong>Product</strong> <strong>Data</strong> <strong>Sheet</strong>: <strong>DUROPAL</strong> <strong>Worktops</strong>Minimum production volumesStandard width Strength in mm Minimum order of format 4,100 mm600 mm (post-forming on 1 side) 28/38900 mm (post-forming on 1 side) 28/381200 mm (post-forming on2 sides)640 mm (post-forming on2 sides)670 mm (post-forming on2 sides)900 mm (post-forming on2 sides)1000 mm (post-forming on2 sides)28/3828/38383828/3824 pieces (increment of 12 pieces pervariant)12 pieces (increment of 6 pieces pervariant)12 pieces (increment of 6 pieces pervariant)24 pieces (increment of 12 pieces pervariant)24 pieces (increment of 12 pieces pervariant)12 pieces (increment of 6 pieces pervariant)12 pieces (increment of 6 pieces pervariant)Minimum order of format5,300 mm16 pieces (increment of 8 piecesper variant)8 pieces (increment of 4 piecesper variant)8 pieces (increment of 4 piecesper variant)16 pieces (increment of 8 piecesper variant)16 pieces (increment of 8 piecesper variant)8 pieces (increment of 4 piecesper variant)8 pieces (increment of 4 piecesper variant)Applies for V20E1 / P3 base materialDeviating formats and base materials on requestDelivery periodBy agreementTerms and Conditions Governing Prices and DeliveryOn requestTechnical serviceOn request, we can send you our <strong>DUROPAL</strong> Technology Brochure as a pdf file.Standards / Certif ications EN438, ISO 13894Useful informationLeaflets, GKV / ICDLI processing recommendationsGKV Web site: http://www.laminate-info.biz/deICDLI Web site: http://www.icdli.comArnsberg, 10.03.2008<strong>DUROPAL</strong> <strong>Product</strong> Management HPL / HPL ElementsPage 2 of 2<strong>DUROPAL</strong> GmbH • 59759 Arnsberg • Tel.: +49(0)2932-302-0 • Fax: +49(0)2932-302-341www.duropal.com • info@duropal.comStatus May 2008
Change language