Lightpipe - Qioptiq Q-Shop

More documents

Recommendations

Info

TRACEPRO ® TUTORIAL<strong>Lightpipe</strong>Selecting a SurfaceTracePro uses surface and object selections for many operations.1. Select the right end of the rod using the Edit|Select|Surface menu (or Select Surface tool), use the mouse to “pick” therod end.2. When selecting the surface in the model window, it may be necessary to change the cursor to “orbit view” mode, rotatethe cylinder, then change the cursor back to “surface select” mode to pick the surface.3. Objects and surfaces can also be selected in the system tree.Page 2www.lambdares.com
TRACEPRO ® TUTORIAL<strong>Lightpipe</strong>Add a BendAdd a bend to the selected surface by revolving the face along an arc.1. Select Surface 2, then Edit|Surface|Revolve (or right-click | Revolve) to open the Revolve Surface Selection2. Enter 90 for the Angle and 25 for the bend Radius.3. The surface will be “swept” or “revolved about an axis defined by a position in space and a vector. Locate the Axis at thepoint (0,-25, 30) and define the axis to be pointing along the X axis in model space.4. Press the Revolve Surface button to perform the bend.5. You might need to decrease the size of the model to see the bend.Page 3www.lambdares.com
Page 1: TRACEPRO ® TUTORIALLightpipeRequir
Page 6 and 7: TRACEPRO ® TUTORIALLightpipeSetup
Page 8 and 9: TRACEPRO ® TUTORIALLightpipeSettin
Page 10 and 11: TRACEPRO ® TUTORIALLightpipeCandel

Lightpipe - Qioptiq Q-Shop

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?