Lightpipe - Qioptiq Q-Shop

More documents

Recommendations

Info

TRACEPRO ® TUTORIAL<strong>Lightpipe</strong>Setup a Grid of RaysNow you have an optical model ready for raytracing. This step will set up a gaussian beam in for a Grid Raytrace.1. Select Grid Source 1 in the Source Tree, then open the Grid Source dialog with Define|Grid Source. (or right-click | Define| Grid Source)2. Update the Grid Setup tab so the Outer radius is 2, the Grid Pattern is Random and the Total rays is set to 1000.You define the location of the grid with the Origin which should be set to (0,0,-0.1) as shown on the left.3. Modify the Beam Setup tab to have an Angular profile of Gaussian with 30 degree Half angles as shown on the right.Page 6www.lambdares.com
TRACEPRO ® TUTORIAL<strong>Lightpipe</strong>Trace the RaysSelect Raytrace | Trace Rays to perform the raytrace. TracePro starts by performing an Audit which updates the model with propertyinformation from the database. The output is shown below.You can turn off the rays using the Analysis|Display Rays menu or try Analysis|Ray Sorting to reduce the number of raysdrawn.Page 7www.lambdares.com
Page 1 and 2: TRACEPRO ® TUTORIALLightpipeRequir
Page 3: TRACEPRO ® TUTORIALLightpipeAdd a
Page 8 and 9: TRACEPRO ® TUTORIALLightpipeSettin
Page 10 and 11: TRACEPRO ® TUTORIALLightpipeCandel

Lightpipe - Qioptiq Q-Shop

Create successful ePaper yourself

Delete template?

Save as template?