MODEL G5955 HEAVY DUTY HANGING AIR FILTER - Grizzly.com

This manual provides critical safety instructions on the proper setup,operation, maintenance, and service of this machine/tool. Save thisdocument, refer to it often, and use it to instruct other operators.Failure to read, understand and follow the instructions in this manualmay result in fire or serious personal injury—including amputation,electrocution, or death.The owner of this machine/tool is solely responsible for its safe use.This responsibility includes but is not limited to proper installation ina safe environment, personnel training and usage authorization,proper inspection and maintenance, manual availability and comprehension,application of safety devices, cutting/sanding/grinding toolintegrity, and the usage of personal protective equipment.The manufacturer will not be held liable for injury or property damagefrom negligence, improper training, machine modifications or misuse.

INTRODUCTION ............................................... 2 SECTION 1: SAFETY ....................................... 5 SECTION 2: POWER SUPPLY ........................ 8 SECTION 3: SETUP ....................................... 10 Table of ContentsSECTION 4: OPERATIONS ........................... 16 SECTION 5: MAINTENANCE ......................... 17 SECTION 6: SERVICE ................................... 18 SECTION 7: WIRING ...................................... 19 SECTION 8: PARTS ....................................... 21 WARRANTY & RETURNS ............................. 25

INTRODUCTIONManual AccuracyContact Info your machine may not exactly match themanual www.grizzly.com Machine Description

IdentificationFront ViewRear ViewFigure 1. To reduce the risk ofserious injury when usingthis machine, read andunderstand this entiremanual before beginningany operations.AccessoriesSome aftermarket accessories can beinstalled on this machine that could causeit to function improperly, increasing the riskof serious personal injury. To minimize thisrisk, only install accessories recommendedfor this machine by Grizzly.NOTICERefer to the newest copy of the GrizzlyCatalog for other accessories available forthis machine.G6514—5-Micron Washable Primary FilterG6513—1-Micron Washable Secondary FilterG5956—Removable Control Switch for G5955

Machine Data SheetCustomer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901Weight................................................................................................................................................................ 48 lbs.Width (side-to-side) x Depth (front-to-back) x Height........................................................... 30-5/16 x 24 x 12-3/16 in.Footprint (Length x Width)........................................................................................................................... N/A x N/AType............................................................................................................................................................. CardboardContent........................................................................................................................................................... MachineWeight.................................................................................................................................................................. 48 lb.Length x Width x Height....................................................................................................................... 33 x 27 x 16 in.Power Requirement........................................................................................................... 120V, Single-Phase, 60 HzFull-Load Current Rating....................................................................................................................................... 2.5AMinimum Circuit Size...................................................................................................................................... 15 AmpsSwitch......................................................................................................................................... Toggle On/Off SwitchSwitch Voltage..................................................................................................................................................... 120VCord Length............................................................................................................................................................. 6 ftCord Gauge.................................................................................................................................................... 16 AWGPlug Included.......................................................................................................................................................... YesIncluded Plug Type.................................................................................................................................... NEMA 5-15Horsepower............................................................................................................................................. 1/6 HPVoltage....................................................................................................................................................... 120VPhase............................................................................................................................................ Single-PhaseAmps........................................................................................................................................................... 2.5ACycle......................................................................................................................................................... 60 HzAir Suction Capacity............................................................................................................................ 510 CFMImpeller Type................................................................................................................................ Squirrel CageFrame..................................................................................................................................... Pre-Formed SteelImpeller....................................................................................................................................................... SteelPaint........................................................................................................................................... Powder CoatedISO Factory ................................................................................................................................................. 1SO 9001Country Of Origin ............................................................................................................................................. TaiwanWarranty ........................................................................................................................................................... 1 YearSerial Number Location ................................................................................................. ID Label on Back of Machine

SECTION 1: SAFETYFor Your Own Safety, Read InstructionManual Before Operating this MachineThe purpose of safety symbols is to attract your attention to possible hazardous conditions.This manual uses a series of symbols and signal words intended to convey the level of importanceof the safety messages. The progression of symbols is described below. Remember thatsafety messages by themselves do not eliminate danger and are not a substitute for properaccident prevention measures.Indicates an imminently hazardous situation which, if not avoided,WILL result in death or serious injury.Indicates a potentially hazardous situation which, if not avoided,COULD result in death or serious injury.NOTICEIndicates a potentially hazardous situation which, if not avoided,MAY result in minor or moderate injury. It may also be used to alertagainst unsafe practices.This symbol is used to alert the user to useful information aboutproper operation of the machine.Safety Instructions for MachineryOWNER’S MANUAL. EYE PROTECTION. HAZARDOUS DUST. WEARING PROPER APPAREL. HEARING PROTECTION. MENTAL ALERTNESS.

SECTION 2: POWER SUPPLYAvailability Electrocution, fire, orequipment damage mayoccur if machine is notcorrectly grounded andconnected to the powersupply.Full-Load Current Rating Full-Load Current Rating at 120V ....2.5 Amps Serious injury could occur if you connectthe machine to power before completing thesetup process. DO NOT connect to poweruntil instructed later in this manual.Circuit Requirements Nominal Voltage ........................................ 120VCycle ..........................................................60 HzPhase ........................................... Single-PhasePower Supply Circuit ......................... 15 Amps For your own safety and protection ofproperty, consult an electrician if you areunsure about wiring practices or electricalcodes in your area.Note: The circuit requirements listed in this manualapply to a dedicated circuit—where only onemachine will be running at a time. If this machinewill be connected to a shared circuit where multiplemachines will be running at the same time,consult a qualified electrician to ensure that thecircuit is properly sized for safe operation.

SECTION 3: SETUPNeeded for SetupInventory DescriptionQty Unpacking please call us immediatelyat (570) 546-9663for advice. Otherwise, filing a freight claim can be difficult.SUFFOCATION HAZARD!Keep children and pets awayfrom plastic bags or packingmaterials shipped with thismachine. Discard immediately.Box 1: (Figure 3)QtyA. B. Figure 3. NOTICEIf you cannot find an item on this list, carefullycheck the machine and the packagingmaterials. Some of these items may be preinstalledfor shipping or become misplacedduring unpacking.

Site Planning Figure 6Figure 7 Figure 7. Below is a list of things to keep in mind whenselecting a spot for the air filter:Figure 6.

It is very importantthat the hanging air filterbe supported properly Mounting BracketsComponents and Hardware Needed Qty Tools Needed To attach the mounting brackets:1. Figure 8Figure 8. The hanging air filter mayfall and cause serious injuryif it is not properly mounted.These mounting bracketsmust be attached to thebottom edge on the upperlip of hanging air filter to besafely supported.

Mounting Figure 9 10.ONLY mount the air filter unit to joists, wallstuds, or table that can hold at least 100 lbs.DO NOT mount the unit only to sheet rock,pressboard, paneling, or honeycomb wallpanels with expansion-type fasteners. Thefasteners can tear out and the air filter canfall. Ignoring this caution can result in injuryor property damage.Figure9Components and Hardware NeededQty Tools NeededQtyFigure10

To mount the air filter to a ceiling:1. 2. 3. Note: The 2X4’s are cut a little longer thanthe air filter/joists to guard against splittingthe ends when fasteners are driven throughthem.4. Figure 9 or 10 Tip: Try to keep the hole placement even onthe cleats so that the weight of the hangingair cleaner is evenly distributed.5. 6.

SECTION 4: OPERATIONSTo reduce the risk ofserious injury when usingthis machine, read andunderstand this entiremanual before operating.Damage to your eyes and lungs could resultfrom using this machine without proper protectivegear. Always wear safety glasses anda respirator when operating this machine.FilteringPerformance To calculate the recirculating rate for yourshop space:THIS AIR FILTER IS TO BE USED FORWOOD DUST ONLY.DO NOT use it to filtertoxic fumes, paint spray, or dissipate smokeor fumes.General Step 1. Step 2. Step 1 Machine Storage

SECTION 5: MAINTENANCECleaning Filters Figure 11. Keep the air filter unitunplugged during allmaintenance procedures.Ignoring this warning mayresult in serious personalinjury to you or others!Always wear a respiratorand safety glasses whencleaning the filters. Sawdustmay cause allergic reactionsor respiratory problems.To change and service the filters:1 2 Figure 11 DO NOT use compressed air to blow outthe secondary filter in the following steps.If you do, you will damage the filter andreduce filtering quality.34. 5. 6. Note: During regular use the filters can be cleanedseveral times before replacement becomes necessary.To determine whether the filters need tobe replaced, hold them up to the sunlight andvisually inspect them. The filters do not need tobe replaced if you can see through them. Replacethe filters if they are hard to see through and containa lot of caked on dirt and grime.

SECTION 6: SERVICENote:Please gather the serial number and manufacture date of your machine before calling.Motor & ElectricalTroubleshooting Air Filter Operations

SECTION 7: WIRING Note: Please gather the serial number and manufacture date of yourmachine before calling. This information can be found on the main machine label.Wiring Safety InstructionsSHOCK HAZARD. MODIFICATIONS. WIRE CONNECTIONS. WIRE/COMPONENT DAMAGE. MOTOR WIRING. CAPACITORS/INVERTERS. CIRCUIT REQUIREMENTS. EXPERIENCING DIFFICULTIES. The photos and diagramsincluded in this section arebest viewed in color. Youcan view these pages incolor at www.grizzly.com.

Wiring Diagram120 Volt Motor120 VAC5-15 PlugREAD ELECTRICAL SAFETYON PAGE 19!

SECTION 8: PARTSMain Breakdown

Main Parts ListREF PART # DESCRIPTION REF PART # DESCRIPTION1 P5955001 PRIMARY FILTER 23-1/4 X 11-1/4 X 1/2 24 PS01 PHLP HD SCR 10-24 X 1/22 P5955002 SECONDARY FILTER 25 P5955025 MOUNTING BRACKET3 P5955003 DOOR CLIP 26 PB57 HEX BOLT 1/4-20 X 1/44 PS38M PHLP HD SCR M4-.7 X 10 27 PS07M PHLP HD SCR M4-.7 X 85 P5955005 FAN HOUSING 28A PS22M PHLP HD SCR M5-.8 X 256A P5955006A FAN BLADE V2.02.02 29 P5955029 BREAKER/RESET SWITCH ZE-8007 P5955007 FAN INLET 30 P5955030 ON/OFF SWITCH 16A 250V~T1208 PWRCRD110L POWER CORD 16G X 3W 73"L 5-15 30A PN06M HEX NUT M5-.810 PN01M HEX NUT M6-1 31 P5955031 POWER INPUT SOCKET11A P5955011A FIXED PLATE 35 P5955035 POWER OUTPUT SOCKET12A P5955012A GROMMET 37 PN04M HEX NUT M4-.713A P5955013A COVER 38 PS07M PHLP HD SCR M4-.7 X 814A P5955014A MOTOR 1/6 HP 120V 39 P5955039 STRAIN RELIEF STRAIGHT 5/16"14B P5955014B R CAPACITOR 9M 250V 1 X 1-1/2 40 P5955040 MOTOR MOUNT BRACKET15A P5955015A RUBBER BUSHING 41 P5955041 EXPLOSION HAZARD LABEL16 PSS03M SET SCREW M6-1 X 8 42 PLABEL-61B RESPIRATOR LABEL 3.8 X 2H17 P5955017 MAIN HOUSING 43V2 P5955043V2 MACHINE ID LABEL CSA V2.09.1119 P5955019 SWITCH PANEL 44 PLN01M LOCK NUT M4-.720A PS75M PHLP HD SCR M5-.8 X 35 45 PTLW01M EXT TOOTH WASHER 4MM21 PB19 HEX BOLT 1/4-20 X 1/2 46 PWRN01 WIRE NUT 14-22 GAUGE23 P5955023 OUTLET PORT 47 PLABEL-12A READ MANUAL 2W X 3.3H V2.07.05

WARRANTY CARD The following information is given on a voluntary basis. It will be used for marketing purposes to help us developbetter products and services. Of course, all information is strictly confidential.1. 2. 3. 4. 5. 6. 7. 8. 9. Note: We never use names more than 3 times. 10. ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

WARRANTY & RETURNS1 year

Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value!~Since 1983~Visit Our Website Today ForCurrent Specials!ORDER24 HOURS A DAY!1-800-523-4777