BRUSHES Hand brushes

POLISHING/SATINISINGIntroduction & technical informationPERFECTSATINISINGSatinising is a one-stage system for creating flat surfaces. The main considerations when selecting the polishing ring arethe surface characteristics and the appearance after finishing.There are three possible finish grades when satinising a surface.Coarse brush stroke Medium brush stroke Fine brush strokeImportant noteNon-woven abrasive tools are used without polishingpaste because the abrasive particles are alreadyembedded in the base material of the satiniser.These tools made of matted material containing abrasiveparticles are characterised by an open and flexible structure.They are self-sharpening and can be used in wet and dryapplications.Because they can also be used with hand-held tools, theyare ideal for a wide range of applications, from satinising todeoxidising to ultrafine grinding.Our non-woven abrasive tools are available in different gradesand sizes, depending on their purpose.Details can be found in the product toolbars.Finding the right toolPlease check your product choice using the information in the info heading. This will tell you the machinefor each product and its suitability, as well as providing a summary of the available carrier materialgrades (grits) suitable for the material being finished.USETRIM AND MATERIALSatinisingDeoxidisingLight grindingLight deburringBlendingFine grindingcoarsemediumfinesuperfineProduct available with:coarsemediumfinesuperfineSteelStainless steelAluminiumBrassCopper100