INSTALLATION AND USE GUIDE SIC TOOLS e7V1 - SIC-Venim s.r.o.

IV - SIC LOAD1 - Program presentationThis program is used for updating the controller. It installs the elements required for the operation of thecontroller: such as character fonts, translator files, machine definitions, etcSerial Port #: PC port to which the controller is connectedTransfer speed: A high rate reduces the loading time but increases the risks of transfer failing:these risks depend essentially on the surrounding interference and the nature of the cable. To optimizethese rates, start with the highest then select a lower rate working down until the error transfer factor isacceptable.Version: List of elements to be downloaded to the controller: corresponds to theprogram version to be installed.Load : Launches the downloading of the entire list to the controllerDouble-click on an element from the list to transfer only the chosen file.NOTSICTOOLSE7V1US - R04.doc 6/12