solfac pro residual insecticide - Agtech.com.au

BES Approved Label 1106 Solfac Pro Residual Insecticide Page 1 of 7MAIN PANEL – 500 mLCAUTIONKEEP OUT OF REACH OF CHILDRENREAD SAFETY DIRECTIONS BEFORE OPENING OR USINGSolfac ® ProRESIDUAL INSECTICIDEACTIVE CONSTITUENT: 25 g/L BETACYFLUTHRINContents500 mLGROUP 3AINSECTICIDEFor the control of cockroaches, spiders, ants, fleas, flies, silverfish,bedbugs, millipedes, mosquitoes, crickets, stored product pests, armyworm,cutworm, webworm, adult scarabs, sawfly larvae and ornamental pests inthe situations specified in the directions for use.IMPORTANT: Read the attached booklet before use.APVMA Approval Number: 59424/500/0906

BES Approved Label 1106 Solfac Pro Residual Insecticide Page 2 of 7MAIN PANEL – 200 mLCAUTIONKEEP OUT OF REACH OF CHILDRENREAD SAFETY DIRECTIONS BEFORE OPENING OR USINGSolfac ® ProRESIDUAL INSECTICIDEACTIVE CONSTITUENT: 25 g/L BETACYFLUTHRINContents200 mLGROUP 3AINSECTICIDEFor the control of cockroaches, spiders, ants, fleas, flies, silverfish, bedbugs,millipedes, mosquitoes, crickets, stored product pests, armyworm, cutworm,webworm, adult scarabs, sawfly larvae and ornamental pests in thesituations specified in the directions for use.IMPORTANT: Read the attached booklet before use.APVMA Approval Number: 59424/200/0906

BES Approved Label 1106 Solfac Pro Residual Insecticide Page 3 of 7Front page of booklet – all packsCAUTIONKEEP OUT REACH OF CHILDRENREAD SAFETY DIRECTIONS BEFORE OPENING OR USINGSOLFAC PRO RESIDUAL INSECTICIDEACTIVE CONSTITUENT: 25 g/L BETACYFLUTHRINGROUP 3A INSECTICIDEFor the control of cockroaches, spiders, ants, fleas, flies, silverfish, bedbugs, mosquitoes, crickets, storedproduct pests, armyworm, cutworm, webworm, adult scarabs and sawfly larvae in the situations specified inthe directions for use.STORAGE AND DISPOSAL: Store in the closed, original container in a cool, well-ventilated area. Do notstore for prolonged periods in direct sunlight.Rinse containers before disposal. Add rinsings to spray tank. DO NOT dispose of undiluted chemicals on site.Dispose of at a local authority landfill. If no landfill is available, bury the containers below 500 mm in a disposalpit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots.Empty containers and product should not be burnt.SAFETY DIRECTIONSWhen using the prepared spray by hand-held equipment wear cotton overalls, over normal clothing,buttoned to the neck and wrist and a washable hat and elbow length PVC gloves. After each days use washgloves and contaminated clothing.RE-ENTRYDo not enter treated areas until the spray has dried.FIRST AIDIf poisoning occurs contact a doctor or Poisons Information Centre (Phone Australia 131126). Remove fromcontaminated area. Apply artificial respiration if not breathing.MATERIAL SAFETY DATA SHEETAdditional Information is listed in the Material Safety Data Sheet.Exclusion of LiabilityThis product must be used strictly as directed, and in accordance with all instructions appearing on the labeland in other reference material. So far as it is lawfully able to do so, Bayer CropScience Pty Ltd accepts noliability or responsibility for loss or damage arising from failure to follow such directions and instructions.SOLFAC ® is a registered trademark of Bayer.Bayer Environmental ScienceA Business Group of Bayer CropScience Pty LtdA.B.N. 87 000 226 022391-393 Tooronga RdEast Hawthorn, Vic. 3123Phone: (03) 9248 6888Fax: (03) 9248 6800Website: www.bayercropscience.com.auBatch Number:DOM:For 24 hour specialist advice in an emergency only phone 1800 033 111

BES Approved Label 1106 Solfac Pro Residual Insecticide Page 5 of 7Inside booklet contd.Directions For Use (Contd):Situations Rate Pest Critical CommentsMeatworks (nonproduct10 mL/L water Silverfishareas),farm buildings,food processingestablishments,shops, offices,factories,storerooms,Cricketshospitals, schools,barracks, houses,ships, rubbish tipsBedbugsMillipedesDirect spray to areas of potential andexisting infestations eg under skirting boardsand furniture where dark conditions mayfavour silverfish populations.If spraying inside cupboards or storageareas remove clothing and utensils etcbefore spraying.Spray infested areas. In addition a barriertreatment can be sprayed across areaswhere these pests enter buildings.Apply to the bed-frame and walls, cracks,crevices and skirting boards in the vicinity ofthe bed.Apply as a coarse spray to infested areas.TurfInitial or Cleanoutrate - 10 mL/LMaintenance rateor when used asa tank mix with alarvicide - 6 mL/L20 – 40 mL/ 100m²Stored ProductPestsArmywormCutwormWebworm40 – 60 mL/100 m² Adult Scarabs(including Africanblack beetle),AntsThe use of this product in the control ofstored product pests should be consideredpart of an integrated strategy to preventdevelopment of insect populations. Bestresults will be obtained where good hygieneis maintained. Infested areas should becleaned prior to application and regularlycleaned thereafter to reduce food sources forpests.When treating for beetle pests pay specialattention to sheltered areas such as cracksand crevices, under furniture and equipment,floors, walls and shelves. Adult moths can becontrolled by applying this product to wallsand surfaces where the flying adult mothscome to rest.Apply to mown turf in a minimumapplication volume of 200 L/ha (or 2 L/100m 2 ) and irrigate treated areas afterapplication with up to 4 mm water.Use the higher rate when pest numbers arevery high. Repeat as necessary.Application after mowing is recommendedto minimise loss of insecticide in clippings.Native plants 6 mL/L Sawfly larvae Apply thoroughly as a full cover spray.Repeat at beginning of renewed pestactivity. See note on native plants. Do notspray if it is raining or about to rain.AzaleasHibiscusPelargoniumsRoses2 – 4 mL/5 LwaterAphidsBugs (egpassionvinehopper, mealybug,lace bug)CaterpillarsGarden weevilWhitefliesThripsSpray foliage thoroughly when insects arefirst seen or if they reappear.Spray underneath leaf surfaces.DO NOT spray if it is raining or about torain.NOT TO BE USED FOR ANY PURPOSE, OR IN ANY MANNER, CONTRARY TO THIS LABELUNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION.

BES Approved Label 1106 Solfac Pro Residual Insecticide Page 6 of 7Inside booklet contd.GENERAL INSTRUCTIONSMixing: Add the required quantity of Solfac Pro Residual Insecticide to water while stirring.ApplicationDo not spray the moving parts of any machinery, electric motors or switchgear with the water-based product.Note on application to carpets:Since carpets vary in their thickness, colour and material it is recommended that a small, inconspicuous area ofcarpet be sprayed and allowed to dry first to ensure that staining will not occur. Allow treated carpets to drybefore resuming activity on them.Note on native plants and ornamentals:Solfac Pro Residual Insecticide has been used on a wide range of ornamental plant species withoutdamage. However, some species and varieties are particularly sensitive to chemical sprays and as this isoften related to local conditions it is advisable to treat only a small number of plants first, in order to ascertaintheir reaction before treating the whole target group.GENERAL PRECAUTIONS:• For surface treatment only – do not spray into the atmosphere using foggers or other devices designedto create an aerosol.• Use in food processing areas is limited to crack, crevice and barrier strip treatment only.• When using in animal houses do not spray directly onto livestock, their food, water, litter, feed bins, orsurfaces that are accessible to the stock.• Do not spray directly on humans, exposed food or food utensils or food preparation areas.• Avoid contact of spray with timber to which a stain is subsequently to be applied. Evidence of watercontact on timber is sometimes only evident once the stain has been applied.• BEFORE USE : Remove or cover all exposed foodstuffs. Cover all dishes and utensils and surfaceswhere food is prepared.• AFTER USE : Thoroughly ventilate treated areas. Clean up thoroughly before processing/servingresumes.Insecticide Resistance Warning GROUP 3A INSECTICIDEFor insecticide resistance management Solfac Pro is a Group 3A insecticide. Some naturally occurringinsect biotypes resistant to Solfac Pro and other Group 3A insecticides may exist through normal geneticvariability in any insect population. The resistant individuals can eventually dominate the insect population ifSolfac Pro or other Group 3A insecticides are used repeatedly. The effectiveness of Solfac Pro on resistantindividuals could be significantly reduced. Since occurrence of resistant individuals is difficult to detect priorto use, Bayer CropScience Pty Ltd accepts no liability for any losses that may result from failure of SolfacPro to control resistant insects.For further information on managing insecticide resistance contact your local supplier or BayerEnvironmental Science representative.Protection of Wildlife, Fish, Crustacea and Environment: Dangerous to fish. Cover fish tanks beforeusing. Do not contaminate ponds, waterways or drains with this product or used container.APVMA Approval Number: 59424/0906

BES Approved Label 1106 Solfac Pro Residual Insecticide Page 7 of 7Rear panel attached to containerSTORAGE AND DISPOSAL: Store in the closed, original container in a cool, well-ventilated area. Do notstore for prolonged periods in direct sunlight.Rinse containers before disposal. Add rinsings to spray tank. DO NOT dispose of undiluted chemicals on site.Dispose of at a local authority landfill. If no landfill is available, bury the containers below 500 mm in a disposalpit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots.Empty containers and product should not be burnt.SAFETY DIRECTIONSWhen using the prepared spray by hand-held equipment wear cotton overalls, over normal clothing,buttoned to the neck and wrist and a washable hat and elbow length PVC gloves. After each days use washgloves and contaminated clothing.RE-ENTRYDo not enter treated areas until the spray has dried.FIRST AIDIf poisoning occurs contact a doctor or Poisons Information Centre (Phone Australia 131126). Remove fromcontaminated area. Apply artificial respiration if not breathing.MATERIAL SAFETY DATA SHEETAdditional Information is listed in the Material Safety Data Sheet.Exclusion of LiabilityThis product must be used strictly as directed, and in accordance with all instructions appearing on the labeland in other reference material. So far as it is lawfully able to do so, Bayer CropScience Pty Ltd accepts noliability or responsibility for loss or damage arising from failure to follow such directions and instructions.IMPORTANT: READ THE ATTACHED BOOKLET BEFORE USESOLFAC ® is a registered trademark of Bayer.Bayer Environmental ScienceA Business Group of Bayer CropScience Pty LtdA.B.N. 87 000 226 022391-393 Tooronga RdEast Hawthorn, Vic. 3123Phone: (03) 9248 6888Fax: (03) 9248 6800Batch Number:DOM:For 24 hour specialist advice in emergency only phone 1800 033 111