Download - Visionaire Lighting, LLC

RNTSProject Name: Catalog Number: Type9”12”9”9-3/16”12”12¾”Round Non Tapered Steel PolePole Shaft PSI. Shaft is furnished with ground lug inside pole, opposite hand holeBase Plate• Steel Plate base is ASTM-A36 hot rolled steel, meets or exceedsminimum yield strength of 36,000 PSI.• Base templates provided with order. Do not pre-pour.Base Cover• Die-formed from heavy gauge quality aluminum. Two piece cover foreasy installation.• Consult factory for DCB bolt circle info.Pole Cap• Color-impregnated polymer snap-to-close pole cap provided in black.Finish textured thermoset polyester powder coat isthen applied to a minimum of 3 millimeters and then oven-baked at a inhibiting internal coating).Anchor BoltsAnchor bolts meet or exceed a minimum of 36,000 PSI. Anchor boltsPOLES + BASESModel Shaft Size Gauge Height Base Anchorage Mounting Finish OptionsRNTS 4” Ø 119” Base ¾” × 30” Bolt-On Arm Bronze(4R) (11)*9-3/16” BC(9BC)(343) Single (S1) (BZ)5” Ø(5R)6” Ø(6R)7(7)11(11)7(7)7(7)10’12’14’16’18’20’22’25’28’20’22’25’28’30’28’30’35’12” Base*12¾” BC(12BC)12” Base*12¾” BC(12BC)12” Base*12¾” BC(12BC)Custom Base*Consult factory(CB)Direct Burial*Specify below-gradelength in the form ofDB-xx, where “xx” feet.(DB-___)NOTE: CUP and/or HHCOptions required.1” × 36”(136)1” × 36”(136)1” × 36”(136)D180 (D2)D90 (D9)T90 (T9)T120 (T1)Quad (QD)Tenon Options2”(T238R)3”(T3R)3½”(T3.5R)4”(T4R)4½”(T4.5R)Black(BK)White(WH)TennisGreen(GN)ForestGreen(FG)Grey(GY)SilverMetallic(SL)CustomColor(CC)Galvanized*No paint(GAL)GFI Receptacle*Standard location is in hand hole(GFI)Custom Bolt Circle*Consult factory(CBC)Round Base Cover(RBC)Rust-Inhibiting InternalCoating & Primer(HCR)Single Banner Arm(SBA)Double Banner Arms(DBA)Direct BurialCoupling*Specify Size and Location asCUP_S-xx_L-yy,“xx” ½” or ¾”“yy” feet from bottom of pole(CUP_S-__L-__)Hand Hole*Specify cover and location asHHC_C-xx_L-yy,“xx” Y for yes, or N for no“yy” feet from bottom of pole(HHC_C-__L-__)For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC.Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.158