Download - Visionaire Lighting, LLC

SNTAProject Name: Catalog Number: TypeSquare Non Tapered Aluminum PolePole Shaft• Extruded from 6063 alloy aluminum tubing. Shaft is furnished withaluminum ground lug inside pole, opposite hand hole opening. Poleshaft includes a reinforced hand hole opening with cover. Center line ofBase• One-piece, high quality aluminum alloy casting for strength andpole base templates.• Base templates provided with order. Do not pre-pour.Pole Cap• Color-impregnated polymer snap-to-close pole cap provided in black.Finish textured thermoset polyester powder coat is then applied to a minimum ofa full two (2) years.POLES + BASESModel Shaft Size Wall Thickness Height Base Anchorage Mounting Finish OptionsSNTA 4” × 4” .125 10’ Cast ¾” × 30” Bolt-On Arm Bronze(4S)*4” only up to 14 feetAluminum (343) Single (BZ)(125)12’ Base(S1)Black(AKB)(BK)5” × 5”(5S).188(188).250(250)14’16’18’20’*Consultfactory forpoles greaterthan 20’Custom Base*Consult factory(CB)Direct Burial*Specifybelow-grade lengthin the form of DB-xxwhere “xx” indicatesnumber of feet(DB__)Anchor BoltsAnchor bolts meet or exceed a minimum of 36,000 PSI. Anchor boltsD180(D2)D90(D9)T90(T9)Quad(QD)Tenon Options2”(T238R)3”(T3R)White(WH)TennisGreen(GN)ForestGreen(FG)Grey(GY)SilverMetallic(SL)CustomColor(CC)Anodized*Consult factoryfor color options(ANO)GFI Receptacle*Standard location is in hand hole(GFI)Coupling*Specify size and location(CUP)Custom Bolt Circle*Consult factory(CBC)Single Banner Arm(SBA)Double Banner Arms(DBA)For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC.Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.160