Ethernet CP S5-TCP/IP-100 - ER-Soft
Ethernet CP S5-TCP/IP-100 - ER-Soft
Ethernet CP S5-TCP/IP-100 - ER-Soft
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Ethernet</strong> <strong>CP</strong> <strong>S5</strong>-T<strong>CP</strong>/<strong>IP</strong>-<strong>100</strong>Turbo <strong>Ethernet</strong> for PLC Oldie<strong>S5</strong>-T<strong>CP</strong>/<strong>IP</strong>-<strong>100</strong> is the high performance <strong>Ethernet</strong> interfacefor Simatic* <strong>S5</strong> PLCs. With 10 and <strong>100</strong> Mbps thecommunciation processor provides top level data rates.The <strong>Ethernet</strong> <strong>CP</strong> communicates with Siemens S7 and <strong>S5</strong>PLCs and also with Modbus on T<strong>CP</strong> devices of Schneider,Wago and others. Send / Receive communications (rawdata) is provided as well.Connect your <strong>S5</strong> PLC with other PLCs in the field, visualizeprocess data and operating data via OPC on your PC orprogram your <strong>S5</strong> PLC via T<strong>CP</strong>/<strong>IP</strong> or ISO (H1).Other field devices may be connected to the integrated 4port switch and small local networks may be designed.Special FeaturesCommunicationCan be used with T<strong>CP</strong>/<strong>IP</strong>, ISO on T<strong>CP</strong> (RFC<strong>100</strong>6), H1and Modbus on T<strong>CP</strong> simultaneously and in parallelCommunication with Siemens <strong>S5</strong> and S7 PLCs via ISOon T<strong>CP</strong> (RFC<strong>100</strong>6)Communication with PLCs of Groupe Schneider,Beckhoff, Wago etc. via Modbus on T<strong>CP</strong>Send/Receive Communication (raw data)Pre-configured connections (standard connections) forlayer 7 communication (e.g. OPC communication)Spontaneous data traffic with Fetch on EventSecurityTop level security standard of data transfer via permanentmonitoring of connection stateOptional password protectionProtected configuration in case of failure in power supplyAdditional backup on Memory Card<strong>S5</strong>-T<strong>CP</strong>/<strong>IP</strong>-<strong>100</strong>:Powerful<strong>Ethernet</strong> <strong>CP</strong>Comfortable connection diagnosisSingle connection diagnosis and overview of allconnectionsPage frame diagnosisSeparate monitoring of standard connections andFetch on Event connectionsNetwork state, Number of sent and received frames,analysis of the status wordProgramming the <strong>S5</strong> PLCOnline via the network (T<strong>CP</strong>/<strong>IP</strong> or H1)ConfigurationOnline via the network (T<strong>CP</strong>/<strong>IP</strong> or H1)Serial via the PG interfaceOffline for later transfer to the <strong>S5</strong> <strong>CP</strong>
Technical Details4 Port <strong>Ethernet</strong> SwitchRJ4510/<strong>100</strong> Mbpsfull duplex / half duplex10-BaseT / <strong>100</strong>Base-TXAutonegotiationLink LED and Activity LED for each portPG interface1 x TTY15pin D-Sub femalewith locking postCompact Flash SlotType I or II (standard)to save configuration, hot plug capableSupported ProtocolsT<strong>CP</strong>/<strong>IP</strong>ISO on T<strong>CP</strong> (RFC<strong>100</strong>6)ISO (H1)Modbus on T<strong>CP</strong>PLC HeaderDNS, DH<strong>CP</strong>, SNMP services according to MIB II, FTPJob TypesSend DirectReceive DirectFetch activeFetch passiveWrite activeWrite passiveFetch on EventCard formatDouble Europe cardConditions:Temperature:Operating: 0 to 60°CStoring: -20 to 70°CTransport: -20 to 70°CRelative humidity: max. 95%Supply voltageDC +5V via <strong>S5</strong> backplanePower inputmax. 3AConfiguration toolINATnet ParameterizationCompatibility<strong>S5</strong>-T<strong>CP</strong>/<strong>IP</strong> and <strong>S5</strong>-T<strong>CP</strong>/<strong>IP</strong>-<strong>100</strong> are compatible. Whenupgrading, existing configuration files may be used.Order Data<strong>S5</strong>-T<strong>CP</strong>/<strong>IP</strong>-<strong>100</strong>, <strong>Ethernet</strong> interface for Simatic* <strong>S5</strong>, inclusiveINATnet ParameterizationProduct:Order No.: Price:<strong>S5</strong>-T<strong>CP</strong>/<strong>IP</strong>-<strong>100</strong>200-4000-01 € 1.989.-May be used inAG-115, AG-135AG-150, AG 155Required space1 slotfor use in AG-115 adaption casing requiredAccessoriesProduct:PLC cable, <strong>CP</strong> to <strong>CP</strong>URS232 / TTY cableCF Card 64MBOrder No.:700-1700-01700-1500-05700-2400-01Price:€ 51.-€ 87.-€ 29.-* Simatic, <strong>S5</strong>-115, <strong>S5</strong>-135, <strong>S5</strong>-150 and <strong>S5</strong>-155 are registered trademarks of the Siemens AG.Stand: 09/06
Change language