PROFDRIVE 10-2WD / 12-2WD - Farmi Forest

More documents

Recommendations

Info

PROFDRIVE 10-2WD / 12-2WDASSEMBLYSAFETY!WARNING!Read the assemblyinstructions before installingthe trailer. Careless assemblyand non-compliance withinstructions may causehazards to users anddamages to the machine.The warranty is void for machines orcomponents which have been damaged dueto non-compliance with approved assemblyand installation instructions.Before beginning the assembly work, ensurethat there is no pressure in the hydraulicsystem and that the trailer cannot be turnedon accidentally.Never connect or disconnect pressure hosesor components when the hydraulic systemis pressurized.Distance A, when the distance between the splinedshafts is at its shortest.3.40AAFirst cut the thicker shaft shield to the correctlength (1). Remember to leave at least a 40mm clearance. Then cut a similar length offthe PTO shaft in the same way. File off theburr.ASSEMBLY1.2.3.4.5.Attach the trailer to the tractor’s tow bar.Adjust the length of the PTO shaft in allpositions.Install the control panel in the cabin so thatusers have optimal access to the switch andadjusting wheel.Connect the trailer brakes’ hydraulics to thetractor’s hydraulic system. See the illustrationfor brake hydraulics.Connect the shaft control to the tractor’shydraulic system.SHORTENING THE PTO SHAFT1 2Shortening the PTO shaft4.Interconnect the tubes and check that theshaft has been shortened enough by movingthe machine gently. Ensure that there is a 40mm clearance. Also move the machinesideways to check that the shaft moves freely.1.2.Connect the device to the tractor.Measure the distance between the splinedshafts (Distance A)12
PROFDRIVE 10-2WD / 12-2WDCONNECTING THE GRAPPLE LOADER TO THE TRAILER’S HYDRAULIC SYSTEMT PLSpump control pressureP connection (Pressure) for grappleloader regulating valvefor tankT connection from grapple loaderregulating valve (return)LS connection for grapple loaderregulating valve (control pressure)CONNECTING PNEUMATIC/HYDRAULIC BRAKESCheck the section on connecting pneumatic/hydraulic brakes in the spare parts list. In the case ofdouble-pipe brakes note that the red clamp connects to the feeder line, while the yellow one connectsto the brake line.13
Page 1 and 2: FROM MACHINE: 4092003 (Profdrive 10
Page 3 and 4: PROFDRIVE 10-2WD / 12-2WDMANUFACTUR
Page 5 and 6: PROFDRIVE 10-2WD / 12-2WDSAFETY INS
Page 7 and 8: PROFDRIVE 10-2WD / 12-2WDSAFETY INS
Page 9 and 10: PROFDRIVE 10-2WD / 12-2WD1. Machine
Page 11: PROFDRIVE 10-2WD / 12-2WDTECHNICAL
Page 15 and 16: PROFDRIVE 10-2WD / 12-2WD12Single a
Page 17 and 18: PROFDRIVE 10-2WD / 12-2WDLUBRICATIO
Page 19 and 20: PROFDRIVE 10-2WD / 12-2WDMAINTENANC
Page 21 and 22: PROFDRIVE 10-2WD / 12-2WDCHECKING A
Page 23 and 24: PROFDRIVE 10-2WD / 12-2WD23
Page 25 and 26: PROFDRIVE 10-2WD / 12-2WD25
Page 27 and 28: PROFDRIVE 10-2WD / 12-2WDPROFDRIVE
Page 29 and 30: PROFDRIVE 10-2WD / 12-2WDFRAME PROF
Page 31 and 32: PROFDRIVE 10-2WD / 12-2WDDRAW BAR +
Page 33 and 34: PROFDRIVE 10-2WD / 12-2WDDRAW BAR +
Page 35 and 36: PROFDRIVE 10-2WD / 12-2WDBRAKE PRES
Page 37 and 38: PROFDRIVE 10-2WD / 12-2WD04074370 H
Page 39 and 40: PROFDRIVE 10-2WD / 12-2WDP2FS-2 SAF
Page 41 and 42: PROFDRIVE 10-2WD / 12-2WD54843410 H
Page 43 and 44: PROFDRIVE 10-2WD / 12-2WD44092120 R
Page 45 and 46: WARRANTYFarmi Forest Oy grants a 12
Page 48: Farmi Forest CorporationAhmolantie

PROFDRIVE 10-2WD / 12-2WD - Farmi Forest

Create successful ePaper yourself

Delete template?

Save as template?