PROFDRIVE 10-2WD / 12-2WD - Farmi Forest

More documents

Recommendations

Info

PROFDRIVE 10-2WD / 12-2WDLUBRICATION DIAGRAMThe lubrication schedule provided in the diagramapplies to machines used in normal conditionswith normal loads. If the machine is subjected toheavy loading or unfavorable conditions, lubricatemore frequently.DAILY OR ON EACH SHIFT(10 HOURS OF USE)1.Check the amount of hydraulic oil in the tank.500 HOURS OF USE4.EVERY SIX MONTHS (1200 HOURS OF USE)5.6.(hydraulic oil ISO-VG46S, 75 liters).Change the multiplier gear oil(API GL-4,SAE 80W/90, amount: 0,6 liters).CAUTION!AFTER FIRST WEEK OF OPERATION(50 HOURS OF USE)2.Change the oil in the multiplier gear(API GL-4, SAE 80W/90, amount: 0,6 liters).250 HOURS OF USE3.Check the amount of oil in the multiplier gearand top up if necessary.CADBLUBRICATION POINT LUBRICANT LUBRICATION FREQUENCYA. Tow bar hinge Lubricant Every 10 h or on each shiftB. Shaft control cylinders Lubricant Every 10 h or on each shiftC. Bogie bearings Lubricant Every 10 h or on each shiftD. Towing eyelet Lubricant Every 50 h or weekly18
PROFDRIVE 10-2WD / 12-2WDMAINTENANCE INSTRUCTIONSHYDRAULIC SYSTEM BLEEDING• After changing the oil or carrying out repairs,let the pump rotate slowly to bleed the air fromthe system.HUB DRIVE ENGINE BLEEDING!CAUTION!Always bleed the air out ofthe engines when removingor changing hydraulic hoses!REPLACING HYDRAULIC HOSES• When changing hydraulic hoses, clean thenew hoses, at least with compressed air.• Check that the hoses are connected properlyafter the change.• If any hoses are removed for long periods oftime, protect the ports properly.• Let the pump rotate slowly to bleed the airfrom the system after changing hoses orcomponents.• When changing engine hoses, attach thenew hose to the existing one using a nipple.Using the old hose, pull the new hose intothe bolster bogie’s body pipe.1.2.3.4.5.6.7.Remove the wheel.Turn the engine so that the bleeder screw is atthe 12 o’clock position.Switch on the brakes.Open the bleeder screw.Turn on the traction and keep it on for as longas there is air coming out.Close the bleeder screw.Repeat for each engine.CHECKING TIRE PRESSURE• Only use appropriate tools for checking andadjusting tire pressure.• Do not exceed the recommended maximumpressure of 2.8 bar.CHECKING AND ADJUSTING HYDRAULICPRESSURE!CAUTION!When the hydraulic system’spressure is being checkedor adjusted, the hydraulic oiltemperature must be 50-70 o C.Hydraulic pressure may only be adjusted byDo not exceed indicated pressures.19
Page 1 and 2: FROM MACHINE: 4092003 (Profdrive 10
Page 3 and 4: PROFDRIVE 10-2WD / 12-2WDMANUFACTUR
Page 5 and 6: PROFDRIVE 10-2WD / 12-2WDSAFETY INS
Page 7 and 8: PROFDRIVE 10-2WD / 12-2WDSAFETY INS
Page 9 and 10: PROFDRIVE 10-2WD / 12-2WD1. Machine
Page 11 and 12: PROFDRIVE 10-2WD / 12-2WDTECHNICAL
Page 13 and 14: PROFDRIVE 10-2WD / 12-2WDCONNECTING
Page 15 and 16: PROFDRIVE 10-2WD / 12-2WD12Single a
Page 17: PROFDRIVE 10-2WD / 12-2WDLUBRICATIO
Page 21 and 22: PROFDRIVE 10-2WD / 12-2WDCHECKING A
Page 23 and 24: PROFDRIVE 10-2WD / 12-2WD23
Page 25 and 26: PROFDRIVE 10-2WD / 12-2WD25
Page 27 and 28: PROFDRIVE 10-2WD / 12-2WDPROFDRIVE
Page 29 and 30: PROFDRIVE 10-2WD / 12-2WDFRAME PROF
Page 31 and 32: PROFDRIVE 10-2WD / 12-2WDDRAW BAR +
Page 33 and 34: PROFDRIVE 10-2WD / 12-2WDDRAW BAR +
Page 35 and 36: PROFDRIVE 10-2WD / 12-2WDBRAKE PRES
Page 37 and 38: PROFDRIVE 10-2WD / 12-2WD04074370 H
Page 39 and 40: PROFDRIVE 10-2WD / 12-2WDP2FS-2 SAF
Page 41 and 42: PROFDRIVE 10-2WD / 12-2WD54843410 H
Page 43 and 44: PROFDRIVE 10-2WD / 12-2WD44092120 R
Page 45 and 46: WARRANTYFarmi Forest Oy grants a 12
Page 48: Farmi Forest CorporationAhmolantie

PROFDRIVE 10-2WD / 12-2WD - Farmi Forest

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?